Forums

Forums
Renewable Heating
Air Source Heat Pum...
Air source heat pum...
 
Notifications
Clear all

Air source heat pump performance

 
Page 37 / 44
Air Source Heat Pumps (ASHPs)
Last Post by batalto 4 years ago
525 Posts
28 Users
418 Reactions
109.1 K Views
RSS
 Kev M
(@kev-m)
Famed Member Member
Joined: 4 years ago
Posts: 1276
07/11/2021 3:23 pm  

@morgan, probably best listening to @heacol re compensation curve.  I was close, but not quite right.


   
👍
2
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 4 years ago
Posts: 618
07/11/2021 4:01 pm  

@heacol

572DE840 7AAC 4BA6 8C04 E0D7609E2DD8
DD75047C A066 4A64 9776 EC7D617CFA07

My main screen and current compensation curve.  What does this tell me and is it good?

 

Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
 Brendon Uys
(@heacol)
Noble Member Contributor
Joined: 4 years ago
Posts: 407
07/11/2021 4:55 pm  

@morgan I would bring the 50 down to 45 and the 30 down to 25.

To shift that curve, all you do is push the up and down on this screen, you do not have to re-adjust the curve every time. 1 up or down will have that approximate efffect on the internal temperature.

image

Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
👍
2
ReplyQuote



Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 4 years ago
Posts: 618
07/11/2021 5:06 pm  

@heacol 

Cheers Brendon.  I’ll give it a go.  Presumably nothing will change until I press the tick button?  Just in case I press the wrong buttons and adjust it badly.

Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 4 years ago
Posts: 618
07/11/2021 5:11 pm  

@heacol 

Actually looking at the picture, I’m not sure I understand.  Up and down buttons?

Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
 Brendon Uys
(@heacol)
Noble Member Contributor
Joined: 4 years ago
Posts: 407
07/11/2021 5:14 pm  

@morgan Yes, + = temperature /compensation curve up = woamer house and vice versa. You only have to adjust the curve once.

Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
👍
2
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 4 years ago
Posts: 618
07/11/2021 5:17 pm  

 

04722B4F 9DD4 4009 A6BF B01FBD60E5B1

@heacol 

All that does is alter the single number in the centre of the screen up or down.

Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
 Brendon Uys
(@heacol)
Noble Member Contributor
Joined: 4 years ago
Posts: 407
07/11/2021 6:01 pm  

@morgan That is correct, it is shifitng the compensation curve up and duwn. Use it as a level. One level up will raise the curve and therefor the flow temperature resulting in a rise in the house temperature, and vice versa.

Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
👍
2
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 4 years ago
Posts: 618
07/11/2021 6:05 pm  

@heacol 

But I don’t see the 45-25 referred to.  I’m confused aren’t I?  Not difficult 😆

Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote



 Kev M
(@kev-m)
Famed Member Member
Joined: 4 years ago
Posts: 1276
07/11/2021 6:20 pm  

@morgan, the screen with the big graph and numbers is where you define the baseline graph.  Yours is currently a 50-30 shape. This defines what outside temps will generate flow temps of 50 and 30 (and all the values in between) when your home screen has a big zero on it.  If you make the big zero -5, then it uses your 50-30 graph but moves it down 5 so that 50-30 becomes 45-25.  You won't see that but it will use it.  That's what Brendan is saying to do.

You could change the big graph to 45-25 and leave the big zero at zero, but that's a bit more complicated.  


   
👍
2
ReplyQuote
 Brendon Uys
(@heacol)
Noble Member Contributor
Joined: 4 years ago
Posts: 407
07/11/2021 6:28 pm  

@kev-m Thanks

Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
👍
2
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 4 years ago
Posts: 618
07/11/2021 6:30 pm  

@kev-m 

Aha. That makes sense. To do the same and keep the ‘big 0’ do I press and hold the left button and go to an edit screen?  I’ve been Googling.  I know, dangerous 😆 but I have to get on top of this system if I can.  Really appreciate the support here.

Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
Page 37 / 44
Forum Jump:
Next Topic  
Related Topics
Topic Tags:  ashp (72) , performance (2) , cop (8) ,
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online