Recent Posts

| Forums | Topics

Page 140 / 170 Prev Next

Posts with their shortened content
	RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix By Pirate Rich, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	🏴‍☠️🔭😂💙👍🏻
	RE: Mixergy Tank Failure By bontwoody, 3 weeks ago Forum Domestic Hot Water & Cylinders
	@editor fortunately we have a boiling water tap in the kitchen. 😁 I had a very courteous and supportive reply from the CEO so let's see what happens next week.
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@wh0am3ye super, glad your back up and running.
	RE: What crazy nonsense are inverter limits and why are they imposed? By Transparent, 3 weeks ago Forum Energy Storage
	A DNO allowing 5kW export on a single-phase supply is unusual.It depends on a number of factors such as cable distance between you and the local substation number of dwellings between you and that su...
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By Wh0am3ye, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thank you for all your responses! I gave the magnetic filter another clean and got the mesh out this time. Flow rate back up to 24.5l/min! Success! I will take a look to see if we have any Y-strainers...
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@editor we now fit 800 micron Y strainers rather than the very standard 100Mic, Samsung and a couple of other makes are very sensitive to low flow and we found when servicing as we don't fit Samsung u...
	RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix By Mars, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	As promised, here's Cap'n Burrows delivering on his promise during a long day of filming. Nearly fours of raw content to edit! Enjoy the short clip. Attachment : Pirate Rich.mp4
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By Mars, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@wh0am3ye, as @ashp-bobba has pointed out, most flow errors on heat pump systems are caused by a blocked Y-strainer. What's remarkable about them is that they don't require a lot of dirt/corrosive bit...
	RE: Heat Pump Installers: Competence, Illusion and the Hard Truth Homeowners Must Face By Mars, 3 weeks ago Forum Government Schemes, Regulations, Planning & Organisations
	@Fiona, I really don’t want to disappoint you, but I have to be honest... many homeowners have gone down this route before with MPs and government departments, and unfortunately, we're yet to see a me...