Recent Posts

| Forums | Topics

Page 141 / 170 Prev Next

Posts with their shortened content
	RE: Mixergy Tank Failure By Mars, 3 weeks ago Forum Domestic Hot Water & Cylinders
	@bontwoody, I completely agree. I have to say, the level of support here has been really disappointing especially from a brand as established and reputable as Mixergy. I genuinely can’t understand why...
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@wh0am3ye Check out by the ASHP on the pipes next to the unit and see if there is a Y strainer this is usually the culprit to look for 1st Attachment : download.jpg
	RE: Daikin 9kW to 8kW Swap Offer from Octopus By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@matban I would have to check the CIBSE guide as we have a software for this but its something like 3x for Kitchen and bathroom 2x for some other areas and 1.5 across the board in other areas but is s...
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By cathodeRay, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@wh0am3ye - it's just possible that is a huge buffer, the mother of all buffers, not sure. What about DHW, is that entirely separate, with a diverter valve? We can explore more tomorrow. Meanwhile get...
	RE: Mixergy Tank Failure By Old_Scientist, 3 weeks ago Forum Domestic Hot Water & Cylinders
	You'd think, given the public profile of this thread and the presence of a representative from @mixergy that they would be pulling out all the stops to get this resolved TODAY. Unfortunately this just...
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By Wh0am3ye, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay Honestly, I'm not sure. The flow and return come from the heat pump, in to the cylinder on the left side and then the flow and return out to the radiators comes out the cylinder on the rig...
	RE: Ecodan Energy Monitoring Pack By CAMorgan, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi @carpenterstation Did you ever resolve the energy monitoring for your cascade system as I have the same issue with a rencent install? Thanks. Caroline
	RE: is a home battery without an EV worth it? By Batpred, 3 weeks ago Forum Energy Storage
	I would find it difficult to justify a battery without renewable production or some sort of cheaper rate electricity. Having it just to enable the oven to work at peak time would not do it for us, we ...
	RE: What is the Heat Geek Guarantee? By Batpred, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Very useful post, one observation: I can see why installers want to stress the efficiency of the pump. Most people will tend to agree with the idea, but are homeowners really into competitions about ...
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By cathodeRay, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@wh0am3ye - can't make out all the details from that photo - is it separated (primary and secondary circuit) or just one big open circuit? Either way, you need to get the mesh filter out of the magn...
	RE: Low Flow Rate Error - 8 kW Ideal Logic ASHP - Help! By Wh0am3ye, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay As far as I can tell, there is just the one filter, on the heat pump side of the cylinder (bottom left in the photo), I attempted to clean it out earlier on, but wasn't able to remove the ...