Recent Posts

| Forums | Topics

Page 109 / 173 Prev Next

Posts with their shortened content
	RE: New Fogstar 15.5kWh upright solution By Transparent, 3 weeks ago Forum Energy Storage
	From my experience with inverters from different Far East manufacturers, starting the inverter can be affected by the preferences you configure, and which combination is currently available. You have ...
	RE: Mixergy Tank Failure By Toodles, 3 weeks ago Forum Domestic Hot Water & Cylinders
	@bontwoody Thank goodness you are ‘back on-line’ so to speak - that must be a great relief! Do keep us posted on what the old cylinder was suffering from please! Regards, Toodles.
	RE: Mixergy Tank Failure By bontwoody, 3 weeks ago Forum Domestic Hot Water & Cylinders
	Just an update. The cylinder has now been replaced and is up and running again. Once it was fitted, the technical department were very helpful in talking me through a commissioning problem (my bad!) ...
	RE: Should Our Water Circulation Pump Be Configured to Run All The Time? By KenBone, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@grahamf happy to help, ive had 4 heat pumps here to test. Currently im running an old Samsung unit, fully open loop, 1 pump, my own automated weather compensation-room influence controls. 1950s house...
	RE: Automation options to maximuse efficiency & ToU tariffs By Batpred, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@majordennisbloodnok Seems reasonable. It would be mad, when managing a heat pump project, to have time to spare with those things. The market is focused on pump efficiency and reaching the manufactu...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By KenBone, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@crimson it all depends, on how many rads/ufh are fully open (no actuators or TRVs, a volumiser won't hurt the system (i have 420l worth), that i can bring in and out of my system, but my system i use...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I’m looking at the diagram in the manual and nowhere is there a LLH, item 6 is a volumiser, on the return. No idea why they’re insisting on the LLH. Should put in a volumiser (80-100 litres) on the re...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	It’s a 13kw Aerona3 (has 2 fans). Model: HPID13R32
	RE: Grant 13kW Aerona3 - issues getting zones to temp By KenBone, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@crimson is it this heat pump Attachment : Screenshot_20251017_173439_Dropbox.jpg
	RE: New Fogstar 15.5kWh upright solution By Batpred, 3 weeks ago Forum Energy Storage
	My suggestion would be to focus on the function. The goal of that oscillator is ultimately to set the 50Hz for the AC outputs that are separate from the grid. I would, but my focus is to make...
	RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump By bontwoody, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@hcas OK Thanks. Will do.
	RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump By HCas, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@bontwoody If you can get it connected to Melcloud, it should work with Havenwise. You would need the Mitsubishi MELCloud Wi-Fi Interface if that is not in place yet. Might be worth double checking w...