| Posts with their shortened content | ||
|
|
RE: Daikin 9kW to 8kW Swap Offer from Octopus
By JamesPa, 4 weeks ago |
|
| Not so. In my case it made the difference between 10.5 kW and 7kW. There are a fair number of others who report similar eg op on this thread. In any case a sense check doesn't just concern ach, it t... | ||
|
|
RE: Daikin 9kW to 8kW Swap Offer from Octopus
By Terry1812, 4 weeks ago |
|
| @jamespa The problem in taking the gas figure is that everyone consumes differently. I had a similar issue about my EPC. But as the surveyor correctly pointed out to me the survey isn’t for you it’s f... | ||
|
|
RE: Mixergy Tank Failure
By Mars, 4 weeks ago |
|
| @bontwoody, I have to say, the response time here is really concerning. This is your hot water we’re talking about, not a minor issue. Most installers will warn that heating might be off for a few day... | ||
|
|
RE: Mixergy Tank Failure
By bontwoody, 4 weeks ago |
|
| @editor @mixergy This is now 4 weeks without a hot water cylinder. I currently have a non-functioning cylinder in the cupboard and functioning but non installed one in the hall. I am currently being ... | ||
|
|
RE: Renewables & Heat Pumps in the News
By Transparent, 4 weeks ago |
|
| It rather depends on what we call 'local area' and 'total load'. Let's re-phrase 'total load' as 'power being handled by the transformer'.That avoids the issue of which way the power is going! Here's ... | ||
|
|
RE: Mitsubishi Ecodan F8 error
By JamesPa, 4 weeks ago |
|
| Better than an early Windows/DOS error 'Faulty keyboard or keyboard not present, press F1 to continue'. This persisted for a couple of decades at least. There may actually be some sense in the flashi... | ||
|
|
RE: Seeking Help for In-Principle Quote to fix a botched heat pump installation by Heat Geek Installer
By DREI, 4 weeks ago |
|
| I can now, I done an automation in Home Assistant that records the power usage when the valve changes between Room (Space Heating) and Tank (Hot Water), so I should be able to work out the indi... | ||
|
|
RE: Bosch CS5800i 5kW - Experience So Far
By Steelbadger, 4 weeks ago |
|
| What a difference a pump makes. We don't have OpenEnergyMonitor installed, and the resolution of the data provided by the Bosch app is limited, but I've been doing what I can with it. Here's a graph o... | ||
|
|
RE: Daikin 9kW to 8kW Swap Offer from Octopus
By JamesPa, 4 weeks ago |
|
| It's increasingly clear that there is frequently problem with heat loss estimates and ach is one of the culprits. There are some installers, including a few here, who will acknowledge that but most w... | ||
|
|
RE: Daikin 9kW to 8kW Swap Offer from Octopus
By Matban, 4 weeks ago |
|
| @jamespa thank you for your thoughts. It does seem to be a choice between a long battle with an uncertain outcome vs a financial hit but with a much more certain and timely outcome. The negotiation ... | ||
|
|
RE: Daikin 9kW to 8kW Swap Offer from Octopus
By Matban, 4 weeks ago |
|
| @terry1812 Thank you for your reply. Yes a 6 would probably be fine. I haven't checked the actual output vs temp chart for it. But with the 6 and 8 having the same hardware and minimum modulation t... | ||
- 26 Forums
- 2,265 Topics
- 50.6 K Posts
- 380 Online
- 5,924 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Electricity price predictions
Is the distance between those new farms and where the e...
By Batpred , 5 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@jamespa hopefully after the rad balancing it will perf...
By AdamK , 5 hours ago
-
RE: Midea ASHP – how to set weather compensation
@mosibi yes I am interested in potentally evolving my s...
By benson , 7 hours ago
-
RE: UFH downstairs and radiators upstairs balancing question
@davidnolan22 Hi, ok first of all it very hard to truly...
By ASHP-BOBBA , 9 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
Installers coming tomorrow. One has messaged messaging ...
By Crimson , 9 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
11.2kW Ecodan Manufacturer: Misubishi Model: PUZ-WM...
By DRB01 , 9 hours ago
-
RE: Homely asking about Solar Panels.
@majordennisbloodnok I will report back with any develo...
By Toodles , 12 hours ago
-
RE: Mediation with RECC, what's your experience?
@editor Thank you, I really appreciate it! I've made ...
By TreeWizard , 13 hours ago
-
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
Are you able to post a photo of that 180-litre cylinder...
By Transparent , 15 hours ago
-
Agreed. It doesn't take all that much maintenance to ke...
By Majordennisbloodnok , 17 hours ago
-
RE: Oil Boiler & Heat Pump Hybrid System
OK. Got it. As a fellow rural West Country resident, ...
By Transparent , 19 hours ago
-
RE: My DIY Heat Pump installation
@pollar-bear Top job, I installed my own too and even t...
By bontwoody , 20 hours ago
-
RE: Who has a V2G EV installation
Not sure how you got that information, @batpred. As of ...
By Majordennisbloodnok , 20 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
Ok so that seems to be the key point namely only mcs ca...
By JamesPa , 1 day ago
-
RE: One flow valve appears to be duff
You might want to consider the following common faults:...
By IaAck , 2 days ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
We are on the Intelligent Octopus Go tariff. We instal...
By GrahamF , 2 days ago
-
RE: New build installation query
@paullacey While the others wait for more info do you m...
By ASHP-BOBBA , 2 days ago


