Recent Posts

| Forums | Topics

Page 31 / 55 Prev Next

Posts with their shortened content
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Had to put in of times , as it didnt work , however hopefully now with off times to suit Cosy then on times stay where they should be .
	RE: Flow Rate & Low Loss Headers By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@morganr I have been thinking some more about those WC curves. Fundamentally they are, so far as I can see, just wrong. If your aim is to run on pure WC or very close, Im far from convinced that you...
	RE: Jokes and fun posts about heat pumps and renewables By Toodles, 2 weeks ago Forum Well & Truly Off The Grid
	@majordennisbloodnok That’s OK as long as the ‘Terminological Inexactitude Filters’ don’t get clogged up every day. Toodles.
	RE: Jokes and fun posts about heat pumps and renewables By Majordennisbloodnok, 2 weeks ago Forum Well & Truly Off The Grid
	…or next to Westminster and just recycle all the hot air generated.
	RE: Jokes and fun posts about heat pumps and renewables By Toodles, 2 weeks ago Forum Well & Truly Off The Grid
	@editor Better still, set yourself up next to a data centre, (Listen to BBC Radio 4’s ‘Rare Earth’ broadcast at 12:04 [Data Centres and the Impact on the World] you could even heat that open-air swimm...
	RE: RDSAP10 effect on existing heat pump EPC rating? By AF1, 2 weeks ago Forum Government Schemes, Regulations, Planning & Organisations
	@aaron All features were in place for the last several EPCs which were D rated. I need C.
	RE: RDSAP10 effect on existing heat pump EPC rating? By Aaron, 2 weeks ago Forum Government Schemes, Regulations, Planning & Organisations
	@af1 if all of those features (GSHP, MVHR, double glazing, full loft insulation, and 100mm phenolic EWI) weren’t in place at the time of the last EPC, then yeah, you should see a significant jump in t...
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By MPHB, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	That is something @bart would need to tell us. I have my probes firmly insulated and actually added thermal paste in order to get as close as possible to the temperature of the flow. I cross my finger...
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@mphb Which sensor is that supposed to be? I assume the primary flow or return? All of the pipework should be insulated but yes especially that probe should be.
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By MPHB, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	This: Attachment : RHH.jpg being uninsulated ensures that any reading out of this will be completely off (unless you're interested in room temperature).