Recent Posts

| Forums | Topics

Page 28 / 57 Prev Next

Posts with their shortened content
	RE: Wattson has landed! By Mars, 2 weeks ago Forum Introductions, Forum Rules & Updates
	@majordennisbloodnok, you’re absolutely right that Wattson’s ability to summarise clearly can also make gaps more noticeable, and identifying those areas is exactly the kind of input we need at this s...
	RE: Wattson has landed! By Majordennisbloodnok, 2 weeks ago Forum Introductions, Forum Rules & Updates
	Being purely selfish for a moment, @toodles, I'd prefer Wattson to be in the bottom left rather than the bottom right - to obscure someone's avatar and so forth rather than the list of topics. However...
	RE: Wattson has landed! By Majordennisbloodnok, 2 weeks ago Forum Introductions, Forum Rules & Updates
	Thanks, @editor Perhaps perversely, Wattson's ability to summarise well is also likely to reveal any gaps in its learning. One area I've already seen is that it admits it doesn't know much about Homel...
	RE: Wattson has landed! By Toodles, 2 weeks ago Forum Introductions, Forum Rules & Updates
	@majordennisbloodnok Likewise! If I may be permitted to put on my curmudgeon’s hat for a moment though …. could Wattson be just a tad less ‘In yer face’ as every time I go to read a posting, a large r...
	RE: Wattson has landed! By Mars, 2 weeks ago Forum Introductions, Forum Rules & Updates
	@majordennisbloodnok your feedback means a great deal... I've known you long enough to value your honest perspective, so this is truly a glowing endorsement. Thank you. The response from industry prof...
	RE: Plate heat exchanger considerations By Scalextrix, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	As far as I can tell my vented system would have a peak pressure of about 0.5 Bar, which technically does meet the absolute minimum pressure of the ASHP (also 0.5Bar) specifications, but you are then ...
	RE: Wattson has landed! By Majordennisbloodnok, 2 weeks ago Forum Introductions, Forum Rules & Updates
	I must admit I detest AI for AI's sake, partly because it's not really true artificial "intelligence" and partly because the carbon footprint is so high for running the servers to support AI. However....
	RE: Plate heat exchanger considerations By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	They need to be switched on/off together. The pump rates may differ however. There is a bit of an science to setting up PHEs which I haven't fully understood yet; your installer should of course do ...
	RE: DHW SET UP with Samsung gen 5 By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@alfapat OK Im a bit stumped, but the good news is that someone in another thread has got it working (it may be a different generation but at least it gives a point of comparison), I have asked them ...
	RE: Plate heat exchanger considerations By Scalextrix, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks, this is what I was thinking about, so as long as heat energy can transfer back through the PHE into the primary circuit during defrost, then that's fine. I suppose the secondary pump needs to...
	RE: Plate heat exchanger considerations By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	If it blows open a joint or a pipe you are correct of course. Perhaps more likely it will detect an existing slow leak due eg to a pinhole in a solder joint or even a pipe and the leak will be detect...
	RE: How not to install a heat pump By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	er, the plumber needs to revisit and do the job properly. "Never time to do it right, always time to do it twice!"