Recent Posts

| Forums | Topics

Page 18 / 161 Prev Next

Posts with their shortened content
	RE: Maximising Home Automation: Integrating Octopus Energy & More By Batpred, 2 days ago Forum Your Home
	As eventually I got my Seplos BMS firmware upgraded, I am now embarking in the next stage of optimising my hybrid inverter+battery setup. I moved my HA to near the Solis inverter, to keep the standard...
	RE: Faulty Clivet heat pump out of the box By Sune, 2 days ago Forum Air Source Heat Pumps (ASHPs)
	@steveimpey as a short term "fix" have you tried turning off the weather comp and running the unit at fixed flow temps? You could vary the flow temp each day - if it doesn't overrun then that could pe...
	RE: Confused by Flow Rates By RadWhisperer, 2 days ago Forum Air Source Heat Pumps (ASHPs)
	I was thinking something similar to the OP half way through the episode still worth a watch of course. Emitter type, delta-T & WDC steepness are just some of the parameters that influence the flow...
	RE: Confused by Flow Rates By Steelbadger, 2 days ago Forum Air Source Heat Pumps (ASHPs)
	I'm no heating engineer, but I feel like there was something missing in the discussion. Flow Rate, dT, Heat Pump Power Output, and Emitter Output are all inextricably linked together. When designing t...
	RE: Confused by Flow Rates By Grantmethestrength, 2 days ago Forum Air Source Heat Pumps (ASHPs)
	Look at you with your fancy schmancy variable PWM pump lol! I am now very envious! The Grant has three settings and a manual flow restricter. Mine looks like it was installed in the 70’s despite being...
	RE: Who's your electricity provider and what's your tariff? By Toodles, 2 days ago Forum Electricity, Tariffs, Monitoring & Providers
	@technogeek Couldn’t agree more! Years back, we were with NPower who eventually sold us out to Eon (who then started being Eon Next). We never had any satisfactory and accurate billing details, lots o...
	RE: Confused by Flow Rates By Pirate Rich, 2 days ago Forum Air Source Heat Pumps (ASHPs)
	Don't mistake designed flow rates (which fixed speed pumps need to be set to to obtain maximum input when required) with variable flow rates that heat pumps with PWM pumps targeting DT (or sometimes t...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By JamesPa, 2 days ago Forum Air Source Heat Pumps (ASHPs)
	The Samsung app is pretty user friendly, but has some limitations in its capabilities unfortunately. At installer show the Samsung rep proudly showed me the latest all singing all dancing full colour...
	RE: Help me keep the faith with my air source heat pump installation By AgentGeorge, 2 days ago Forum Air Source Heat Pumps (ASHPs)
	The double panel radiators I’ve seen have a bleed screw on both panels. Usually the nut around the bleed screw can undo allowing it to be replaced. Id take the photo to City Plumbing and show them if ...
	RE: Confused by Flow Rates By Grantmethestrength, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@editor another great episode, but same as @phil-bell I am now going to have a good look at my flow rate, my lowest flow rate I can get out of my Grant Aerona3 is 28l/min but I think this may not be e...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Grantmethestrength, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	I have the same unit and controller and it has been a journey of learning to say the least. After a terrible ECO4 install it has taken nearly 10 months to get the system to the point where it is easy ...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	Unfortunately this is the ONE day this month I can’t even arrange a call due to work commitments at the time. What I’ll do however is ask the other half if the engineer is ok to leave his numbe...