Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 143 / 174
Posts with their shortened content
RE: Radiator sizing for heat pump installation by British Gas - are these correct?  

By JamesPa, 3 weeks ago

  If bedrooms are too warm just reduce the flow rate through them by turning down the lsvs (or frvs if you can get them fitted) This reduces the average rad temp this reducing the heat emitted. That's...
RE: Radiator sizing for heat pump installation by British Gas - are these correct?  

By JamesPa, 3 weeks ago

  So why not just turn down the frvs on these radiators? There is nothing sacrosanct about the 'design' flow rate
Transparent RE: Isolating the system for a planned power cut  

By Transparent, 3 weeks ago

  We would need to know more about the MCB, RCD and the inverter which is connected, @batpred In most cases the inverter will be one which shuts itself down in the event of it losing its mains input.Ie ...
RE: What crazy nonsense are inverter limits and why are they imposed?  

By Old_Scientist, 3 weeks ago

  No limit simply means there is no limit placed on what you are able to export from your property, so you can export up to the limitation of the equipment. Presumably you'll also be limited by your fus...
Toodles RE: The Battery Battle  

By Toodles, 3 weeks ago

  @agentgeorge ‘Hundreds of HS2 Trains’ - my, you are confident!😉 Regards, Toodles.
RE: The Battery Battle  

By AgentGeorge, 3 weeks ago

  Biggest advantage for the planet is sodium is available from sea water, lithium is mined and causes environmental issues also with extracting the sodium from sea water, you get drinkable water, and th...
Toodles RE: What crazy nonsense are inverter limits and why are they imposed?  

By Toodles, 3 weeks ago

  @agentgeorge Yes, the system will detect and switch over to battery in a few milliseconds - not noticeable, no flickers or glitches but the Tesla app informs me of any and all off-line events. In the ...
RE: Isolating the system for a planned power cut  

By Batpred, 3 weeks ago

  Interesting, could this problem also burn an MCB in a setup where an RCD is connected to that MCB to feed the inverter but will also receive power from the inverter back to the board?  
Page 143 / 174

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO