Recent Posts

| Forums | Topics

Page 116 / 168 Prev Next

Posts with their shortened content
	RE: Automation options to maximuse efficiency & ToU tariffs By Majordennisbloodnok, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	I would extend that, @jamespa. Homely, Havenwise and Adia are the only hands-off options for optimising heat pumps for TOU tariffs. If you want to optimise your electrical use in general for TOU tarif...
	RE: Isolating the system for a planned power cut By Transparent, 3 weeks ago Forum Solar Photovoltaic (PV)
	Apologies, I don't follow what you've written @batpred The possibility of damage from surges doesn't increase with 'high powered' devices. In fact the device most likely to be damaged by a surge or sp...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	He may need to tweak a couple of settings. There is definitely on the r290 a setting for no system separation/buffer/llh. Don't know what it does (I think just enable a couple of sensors and expose ...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	So Grant got back to me, and as suspected there’s no requirement for a LLH, but there is for a volumiser. They even said “volume is King”. I suspect the installer misread the statement of OR a LLH/vol...
	RE: Automation options to maximuse efficiency & ToU tariffs By Batpred, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@jamespa I doubt I would find those homely and similar good value for money. I just found my inverter can handle the octopus agile rate with some ai. At some point I may let it loose but so far I am s...
	RE: What crazy nonsense are inverter limits and why are they imposed? By Batpred, 3 weeks ago Forum Energy Storage
	With my dno, there's a portal with accounts etc and some "applications" like the ev charger are just a few clicks. Others you send docs like for export g99, etc and my dno updates it in the portal. Bu...
	RE: Odd noise in our Ideal Logic ASHP By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I love (and will use) that analogy!
	RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Where is the noise coming from. If its the pump then perhaps somehow put some insulation around the pump. If its the rads, is it the valves. or the pipes? Noise is bad because it indicates somethin...
	RE: How good is the app support for your heat pump? By Grantmethestrength, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I am currently refining my own smart controller for my Grant Aerona3 R32 as it has practically prehistoric controls I am now addicted to ESP32 devices! I have made a few variants Power over Ethernet, ...
	RE: Should Our Water Circulation Pump Be Configured to Run All The Time? By GrahamF, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@kenbone thanks for this input. It sounds like a better approach. Please could you tell me the model of heat pump you are using and point me to the manual or controller screens which explain this?
	RE: Should Our Water Circulation Pump Be Configured to Run All The Time? By Grantmethestrength, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I think my strategy will be to leave it always on during heating season and then change it to sniffing cycle for the summer. I am sure it would be constantly pumping throughout heating season if it wa...
	RE: New Fogstar 15.5kWh upright solution By Batpred, 3 weeks ago Forum Energy Storage
	Thank you. The way that framework splits between 1 and 2 is not clear, but from what I can tell, this hybrid solis is class 1 and 2. It has several internal oscillators including at least 2 for...