Recent Posts

| Forums | Topics

Page 150 / 169 Prev Next

Posts with their shortened content
	RE: Isolating the system for a planned power cut By Batpred, 4 weeks ago Forum Solar Photovoltaic (PV)
	The inverter is a Solis S6-EH1P8K-L-PLUS, the RCD (100ma)+MCB that I mentioned are dedicated to this grid connection supplying the inverter. All circuits supplying the house loads are under RCBOs. The...
	RE: Radiator sizing for heat pump installation by British Gas - are these correct? By Bash, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa Thanks, I'm assuming as I'll have a decent volume of around 120ltrs + pipework, the reduced flow shouldn't make much of a difference and better than allowing the TRVs to take over too much?
	RE: The Battery Battle By AgentGeorge, 4 weeks ago Forum Energy Storage
	@batpred the future could be ultra capacitors, next best thing to nuclear fission
	RE: What crazy nonsense are inverter limits and why are they imposed? By Batpred, 4 weeks ago Forum Energy Storage
	I am not planning to export at this stage, but am interested to find out what is needed to set an ENA acceptable export limit in this case. The inverter is a Solis S6-EH1P8K-L-PLUS. At some point hom...
	RE: Seeking Help for In-Principle Quote to fix a botched heat pump installation by Heat Geek Installer By cathodeRay, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Which tells us something (including possibly everything) is not right. can you describe exactly how the data gets from wherever it originates to this set of results (the one you posted earlier): ...
	RE: The Battery Battle By Batpred, 4 weeks ago Forum Energy Storage
	@agentgeorge Agree and hopefully there will be a few more switching to heat pumps as well. There will need to be a lot more storage in whatever form it may be. I would not get too worried in terms of...
	RE: What crazy nonsense are inverter limits and why are they imposed? By Toodles, 4 weeks ago Forum Energy Storage
	@old_scientist It is as you say ‘sustained’ output with 10 kW from the battery and ~ 4 kW from solar whilst the house also draws a few hundred Watts to run in the background. This is one of the reason...
	RE: Radiator sizing for heat pump installation by British Gas - are these correct? By JamesPa, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	If bedrooms are too warm just reduce the flow rate through them by turning down the lsvs (or frvs if you can get them fitted) This reduces the average rad temp this reducing the heat emitted. That's...
	RE: Radiator sizing for heat pump installation by British Gas - are these correct? By JamesPa, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	So why not just turn down the frvs on these radiators? There is nothing sacrosanct about the 'design' flow rate