Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 31 / 157
Posts with their shortened content
GrahamF RE: My DIY Heat Pump installation  

By GrahamF, 6 days ago

  Well you certainly are a brave polar bear! A few comments: I presume you have insulated the remainder of the pipe work, since you took the first photo? The sheet you have built for the heat pump lo...
Toodles RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems  

By Toodles, 6 days ago

  And as best I can tell from the Sunamp details, the maximum water output temperature is 55 deg. C Toodles.
Toodles RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems  

By Toodles, 6 days ago

  @morgan Our Mira thermostatic shower system is fed from a Sunamp Thermino ePV210 heat battery via their standard Tempering Valve. This valve is set to maximum and we have no problems at all; we never ...
Mitsubishi Ecodan FTC7 Legionella date set  

By DRB01, 6 days ago

  I can set the number of days between Legionella cycles which I set to 1 and a week later (Friday) it has operated. I would like to set it so there is hot water on Sunday mornings so I could set it to...
Morgan RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems  

By Morgan, 6 days ago

  @chrisjd I don't know, but it's too hot to go full heat and quite hot enough just below the safety stop button.
Toodles RE: When to use Octopus Intelligent Go tariff with my heat pump and battery  

By Toodles, 7 days ago

  @treewizard Yes, I like the extra facilities that NetZero offered over those available from the Tesla app; I felt that though better automation options were then available, the charge per month was ra...
RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems  

By ChrisJD, 7 days ago

  Thanks, that's interesting. Grohe responded to me "we do not produce thermostatic mixers that are suitable for systems where the the hot water supply is only 50 degrees celsius" Out of curiosity, at t...
RE: Help me keep the faith with my air source heat pump installation  

By AgentGeorge, 7 days ago

  @adamk downstairs rads are less prone to airlocks, you can replace the broken bleed screw, you can get a set of two from a plumbers to replace both the blind side and the adjuster side. Shut off both ...
Morgan RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems  

By Morgan, 7 days ago

  I have a Grohe shower with a 3-way diverter fitted to an Ecodan ASHP. DHW at max 50 °C. No problems at all.
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery  

By TreeWizard, 7 days ago

  @toodles I didn't realize I was on a free trial, definitely not going to make the money back at £7 a month! Will need to investigate doing this through home assistant instead.
RE: Help me keep the faith with my air source heat pump installation  

By AdamK, 7 days ago

  They’ve had to cancel the radiator balancing at the last minute for similar problems as they’ve used before, sickness or vehicle problems, bit of a habit with them. anyway was checking an old rad lock...
RE: My Octopus Cosy 6 Heat Pump Journey: From Quote to Completion  

By Chansug, 7 days ago

  @editor thanks for highlighting my name. Yes I did get the ASHP installed by Boxt and overall impression has been good and I would recommend them. I will post a more detailed message about the pros an...
Page 31 / 157

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO