No two meters are equal!
When I first had my PV panels fitted in July 2022, the ordered Tesla Powerwall was not yet available as stock was short; as I wanted to know how much energy was being produced, I had an Enphase Envoy unit fitted and connected to the Tesla Gateway. I had Enphase data for individual panels (IQ7 microinverters) and the Enphase app provided production figures etc. Once the first Powerwall was installed, I also had the full data provided by the Tesla app - and the two sets of data were ‘similar’ for PV panel production figures. I also have the fitted ‘Import / Export Meter’ as seems to be fitted on every installation I have ever seen.
Last year, I started noticing that there were large discrepancies between the Enphase and Tesla figures for solar production; this seems to have started when an Enphase ‘Metering Error’ was flagged up. At the time, my installers could find no reason for this and requested Enphase investigate, they eventually came back to me saying that Enphase had found a fault and had updated the software then reset the error flag. I then noticed that the discrepancy in readings was nearly double on the Enphase report and have had their engineers here several times to investigate. Finally, the engineer found that a CT clamp that fed impulses to the Envoy unit had been connected around the two cables from the two strings of microinverters; the CT clamp was then clipped on further down the line after the two strings had been combined within the Tesla Gateway and then the data agreed with that of the Tesla app!
Now the two units agree very closely in their data reports, it only remains to know why these figures are noticeably lower than the export figures as shown by the SMETS 1 Smart Meter! I have questioned this difference with my energy provider three times and they assure me that the smart meter is working properly. I am not inclined to enquire further but just accept that there are readings and readings! Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
I have worked on complex instrumentation systems for over 50 years, and the worst thing that any system designer can do is provide two individual monitoring systems providing readings of the same variable. They will undoubtedly give different readings.
@derek-m The man who wears a watch always knows the correct time - the man with two watches is never quite sure. 🙂 Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
- 26 Forums
- 2,114 Topics
- 46.4 K Posts
- 77 Online
- 3,410 Members
Join Us!
Latest Posts
-
RE: Benefits of an extra horizontal loop for GSHP
It will improve performance, but by how much depends on...
By Brendon Uys , 2 hours ago
-
Is this just haze or something more?
We clocked this article back in July from the BBC about...
By Mars , 4 hours ago
-
RE: The good, the bad and the not that great – my heat pump installation
Said I would pop back with a update. Only Mr Jesus h...
By Burtis , 16 hours ago
-
RE: No-code, plug-and-play monitoring for your heat pump
@cathoderay i will have to take a look at that, tbh as ...
By Grantmethestrength , 17 hours ago
-
RE: Buffers, hot water and cooling
Thats presumably heat pump DT, what about radiator DT a...
By JamesPa , 17 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Exactly the same here. We now have 13.5kWh ...
By Old_Scientist , 1 day ago
-
Compressor and Evaporator Stratification
I have had a few issues with my Hitachi spilt heatpump ...
By trebor12345 , 1 day ago
-
RE: Wood burner with ASHP - direct air?
This depends on the size of your wood burner and size/t...
By Lucia , 2 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn It's a not a buffer it's a volumiser which is ...
By Lucia , 2 days ago
-
RE: Is your heat pump insured?
To make things clear, lots of insurance companies cover...
By Lucia , 2 days ago
-
RE: Boxt Heat Pump Installation Experience
@adrian any updates since installation? How is it perfo...
By Ashfp , 2 days ago
-
RE: Say hello and introduce yourself
Hi @seatonian - Yes, I know Seaton, and I have the Nat...
By Transparent , 3 days ago
-
@seatonian got your email. Will connect you with a reco...
By Mars , 4 days ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 6 days ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (£700!) bu...
By Prunus , 6 days ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 6 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 6 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 1 week ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 1 week ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@rikiarn - just have a think as to how much it will cos...
By Transparent , 1 week ago