Last seen: Nov 7, 2025
Have you attempted the auto adaptation setting. Thats probably the advisable one for you if your system allows. Even if just until someone more te...
Thanks for the replies. My mind is at rest although it would be great to have more of an idea when it about to run out of H/W. Yes it is a Mitsubi...
Iv got an 8.5Kw Ecodan and my testing shows a saving of approximately 5Kwh £1.30 per day by prohibiting heating during the hrs of between 2300hrs- 044...
Without doing the precise maths here, for me to mess about with the app on a daily basis rather than the joy of just forgetting about it and leaving i...
had the same issue. Strange as it may sound I changed the batteries in the wireless controller. Bobs your uncle
Iv just switched from Octopus Go to the new Eon drive tariff as it gives a rate of 9.5p between midnight and 7am. As a high mileage EV driver this s...
Hot water is timed to come on between 5am to 7am at its maximum 60c at 9.5p/kWh. Thats ample enough h/w for 2 showers and the washing up. My upcom...
170L tank in the airing cupboard where the immersion tank was. pipes arnt lagged that feed off the tank which I’d imagine they should be although I’...
@kev-m one issue I’m having is that my hot water loses very close to 1 degree an hr throughout the day. I do have an annual service in a few week...
- 26 Forums
- 2,289 Topics
- 51.4 K Posts
- 407 Online
- 5,949 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Electricity price predictions
I sent in two submissions to the SSES Governance Consul...
By Transparent , 55 minutes ago
-
RE: DHW heat loss through pumps.
Sorry Im still not getting it. How does a recirculat...
By JamesPa , 2 hours ago
-
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
And the saga continues… So today a Senior Grant Engin...
By Crimson , 4 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
The problem comes only if you can't turn the ft down su...
By JamesPa , 4 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
@jamespa Yes, the OAT sensor is situated on the back pa...
By Toodles , 6 hours ago
-
RE: Ecodan ASHP Low COP and Unstable Compressor Frequency
Just to clarify, returning water from UFH is colder tha...
By lukewarmbath , 6 hours ago
-
RE: 10kw heat pump run in 24*7 data?
A different heat pump (Midea 14kW) but a stark reminder...
By cathodeRay , 6 hours ago
-
From what I see, the work to upgrade the cable, etc all...
By Batpred , 7 hours ago
-
RE: Confusion over Octopus Tariffs
That's sounds great. I have no ASHP, but 15kwh storage....
By Batpred , 8 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Locked environments are difficult to manage, it also me...
By Batpred , 8 hours ago
-
RE: Do Heat Pumps need to start up at Full Power?
@steelbadger Attached is the plot for various parameter...
By Toodles , 11 hours ago
-
RE: Has anyone seen this problem before? Huge anticycling times
Hi all, I had a 15kw installed 3 weeks ago. The past we...
By jamesh , 12 hours ago
-
Adia Therma - 'autopilot for heat pumps'
Thought I'd pop this one in here as the Adia proposal a...
By seatonian , 1 day ago
-
RE: Mitsubishi Ecodan R290 10kW performance
Don't know answer to final question. Your contract p...
By JamesPa , 1 day ago
-
RE: New Fogstar 15.5kWh upright solution
Ah, it seems PACE BMS are easy to source on AliExpress,...
By Batpred , 1 day ago
-
RE: Vaillant water pressure gauge vs Analogue gauge
@jamespa Agreed I don't feel concerned about this, espe...
By jeegnesh , 1 day ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
@toodles Yep, and it is not even a sticking plaster ...
By Jeff , 1 day ago
-
RE: Gov wants to alter our FIT contracts from rpi to cpi
The consultation is just part of the normal process for...
By Jeff , 1 day ago

