Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 26, 2026
A work colleague has an ongoing case with a ECO install. I think they're about to take the council to court.
Grant carried out mine. The guy arrived, spent about 10 minutes with what looked like a weed killer container and sprayed all around the heat pump. He...
Final Update. Yesterday, I was going through the motions of looking at how each menu impacts the Set Back flow temp. I considered the combination of...
Iām going to take a look into what youāve said over the next few days. Iāve also invited others from another forum whoāve been offering help who have ...
Indeed, what were they! Everything relates to air temp in the manual. The target indoor temp was 10 Degrees; the WC was set very low as an ...
Iām using WC with a Stat attached. This is the standard setup with the Smart Controller. The manual points to a relationship between the Air and Flow ...
I have the Grant Volumiser. There are no secondary controls, just the Smart Controller (EcoNET). Each time I approach Grant about this issue, Iām told...
The set back periods are 8 1/2 hours (between 9:30pm - 6:00am). The chart showing the spikes is one set back period (8 1/2 hours).
Ask one of the mods to message me and I will put you in contact with someone who went through the same situation.
@grahamF Only the comments I've received from old school HVAC engineers in the states and nordic countries. There is a logic to what they're sayi...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Adventures in heat loss calculations
Great work. Have you subtracted the fixed contributio...
By JamesPa , 33 minutes ago
-
I bought it, read it, enjoyed it. Despite my earlier c...
By JamesPa , 42 minutes ago
-
RE: Tell us about your Solar (PV) setup
Our PV set-up has moved over time. Warning this is a sh...
By Judith , 13 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 21 hours ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 23 hours ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 1 day ago
-
Thank you @trebor12345
By rgabor , 1 day ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 2 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 5 days ago
SPONSORS
