Last seen: Jun 21, 2025
I lowered the temp to 60 (the lowest it will go) for today's cycle. It got to 58 in the expected amount of time, then the element went off and came on...
I have an ASHP, solar and (only) 5.2kWh of battery storage. Last year I was on Cosy when it came out, then switched to Flux, then back to Cosy in Autu...
@transparent Oh right, I'll get all of that insulated as well. They actually left quite a lot in the rubbish pile, which I kept. Out of interest, all ...
Thank you @toodles , I ordered a temperature probe with two clamps and it's taken a while to arrive, I just need some time when the kids are out now s...
@transparent Below the Tundish the pipe goes to the exterior, the 2nd pic shows what is above. They were a bit miserly with insulation, I h...
@transparent It looks like the element is set to it’s maximum. Pretty sure that the grey wire halfway up the tank is a temp sensor right?
@transparent I can see my DHW tank temperature in the MELCloud app, hence why I thought that it would 'know'.
I didn't know that this is the way that it would work, I assumed that the Ecodan would be reading the temperature of the DHW tank and adjust according...
I managed to partially keep an eye on mine today for it's cycle (200L tank btw); 13:27 Tank temp 49.5°C ASHP goes off 3kW load in addition to...
@richard24738 My next L cycle is tomorrow conveniently, I'll try to keep an eye on it to see what it does.
@richard24738 Perhaps I need to re-visit mine for a closer inspection, thanks. I would not be surprised at all if there were gremlins in the Mitsubish...
Latest Posts
-
RE: Mitsubishi cycling while on chilled water output
@downfield With a car radiator the hot water from the e...
By IaAck , 2 hours ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 9 hours ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 9 hours ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 1 day ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
Can we have some links to those you're considering plea...
By Transparent , 1 day ago
-
RE: Commencing on an ASHP Installation Process
That outside pipework would concern me. Surely rigid se...
By benson , 2 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 2 days ago
-
@hughf, I think we’ll organise an RHH session at Instal...
By Mars , 3 days ago
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 3 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 3 days ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 3 days ago
-
RE: When will heat pumps and install prices come down?
... which of course is impossible because the world mov...
By JamesPa , 3 days ago
-
RE: Battery storage to run Heat Pump.
I would be surprised if the battery chemistry is going ...
By Transparent , 4 days ago
