Last seen: Jun 22, 2025
Thanks for the nudge @judith Yes, I do have more technical information on the likely causes of the Iberian Outage,but please appreciate that I'm alr...
I agree @mark-h The Building Regs are now very readable...... although I do miss the sections of 'advisories' and illustrations of acceptable practice...
Thanks for letting us know @clockworks I admire your optimism that the thread is now 'closed'. It'll get re-opened at some point...... when someon...
Has the inverter got enough oomph to run your ASHP from the backup (always on) port?Or are you content to lose heat output during a power-cut?
Thank you @robs - that very useful data. The issue was mentioned to me by a Network Planner for a DNO. There's considerable diversification applie...
@jamespa - how is that the Vaillant data-logging is showing a COP below 1.0 on occasions? Separately... Do any of these manufacturer's data-logs...
I don't think the two conduits should be spaced horizontal to each other because they might block the flow of concrete when it's poured.That could lea...
Height above ground level matters only when you're considering the position at which you'll place the drain-valves.They'll obviously need to be at the...
That's great @fingers ICF construction is known to me, although it's not used much in my area. Let's look first at the conduit needed to carry the ...
I'm just trying to imagine this construction approach @fingers Is the concrete to be an 'internal' wall in which energy is stored as heat?And you ...
Latest Posts
-
RE: Vaillant AroTherm Plus 7kW
@scalextrix if your under unit heater is like our Myson...
By Judith , 2 hours ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@cathoderay how did you get a script to run for that- d...
By benson , 3 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness bold choice on the Kronoterm. Nice! Wi...
By Mars , 8 hours ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@ashp-bobba thank you, and equally so, thank you for ta...
By Mars , 1 day ago
-
@judith good to know… I’ll continue to feed Wattson, an...
By Mars , 2 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
@editor great article re accreditation. I note ISO/IEC ...
By Bart , 3 days ago
-
RE: Renewables & Heat Pumps in the News
Here’s a little more technical detail/p>
By Judith , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
I don't (yet), but my PW3 is due to be installed shortl...
By Old_Scientist , 3 days ago
-
RE: MCS and NAPIT complaints process
@chrislay, is your heat pump complaint still unresolved...
By Mars , 3 days ago
-
RE: ASHP Install from hell - help please
@saf1973 I’ve been going through old cases on the forum...
By Mars , 3 days ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@aaron There's the rub, the database does not list my ...
By AF1 , 4 days ago
-
RE: Commencing on an ASHP Installation Process
Yes, it's "doable" if everything goes to plan, they arr...
By Old_Scientist , 5 days ago
-
RE: How not to install a heat pump
You are right. Thinking on this has evolved over the p...
By JamesPa , 6 days ago
-
RE: DHW SET UP with Samsung gen 5
Thats good news indeed, you are very likely almost ther...
By JamesPa , 6 days ago
-
RE: Plate heat exchanger considerations
As far as I can tell my vented system would have a peak...
By Scalextrix , 6 days ago
-
RE: Air Changes per Hour - ACH and the MCS requirement
There have been a few discussions dotted around (e.g. I...
By Declan90 , 6 days ago
