
Last seen: Oct 16, 2025
@alfapat Not at all dumb, much better to ask before jumping to conclusions. The primary pump will be the one in or attached directly to the output of ...
@alfapat My only experience is with Homely. Regards, Toodles.
@jamespa Sounds to me as though the secondary pump may be running too fast and causing mixing in the LLH. You might care to try lowering the speed of ...
@alfapat Your aim (when the system is running and has settled down after a few minutes) should be to match the temperature feeding out of the LLH to t...
@burtis Perhaps you meant to write - Stilson-thing else? (Sorry😉) Toodles.
@burtis I and probably others have requested that Homely include the Dashboard in the app; they are however, reluctant to do so as they feel it may re...
@editor It’s all give and take Mars, I give a little and take a lot! Regards, Toodles.
@johnnyb There is the Homely Dashboard which provides a fair amount of information; not SCOP but you can bring up COP for the last few weeks or any nu...
@richard24738 Good to hear you are getting there now, we have a bedroom that gets the most solar gain in the whole house and we resort to a limiting s...
@chansug ‘It’s yer Thermocouple Mate! I’ll troy to bendit back but, (whistles through teeth) could cost yer if it breaks…’ As to the radiators, it i...
@clockworks Along with the Law, the MCS can be an ass with absobloominglutely no margin for pragmatism; we are two and used a 99 litre DHW cylinder wi...
@andrewj In my case, I would put any shortcomings down to the installers but fortunately for us, our system is working very well. I took the measure o...
- 26 Forums
- 2,221 Topics
- 49.3 K Posts
- 235 Online
- 5,881 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: New Fogstar 15.5kWh upright solution
How does it work off grid without an oscillator?
By Batpred , 14 minutes ago
-
RE: Automation options to maximuse efficiency & ToU tariffs
It would be very useful if anyone could answer it! ...
By Batpred , 16 minutes ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
I probably got that wrong, looks like the valve is for ...
By Crimson , 19 minutes ago
-
Yes, you make a good point and beyond servers, engineer...
By Batpred , 34 minutes ago
-
RE: Isolating the system for a planned power cut
Insurance helps and when adding high powered devices li...
By Batpred , 2 hours ago
-
RE: Odd noise in our Ideal Logic ASHP
These are well respected pumps so far as I know. Onl...
By JamesPa , 4 hours ago
-
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
Noted The Vaillant doesn't either, other than with a ...
By JamesPa , 6 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
Is there a lookup facility to see your limit, or is it ...
By DREI , 8 hours ago
-
RE: Electricity price predictions
Without getting too much into politics, given that the ...
By Batpred , 8 hours ago
-
UK Consumer Law Reality Check (for anyone dealing with ...
By DREI , 8 hours ago
-
@dgclimatecontrol Thanks... this was resolved back in M...
By Sandman1600 , 9 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
That's the problem with the UK, in comparison with Amer...
By DREI , 9 hours ago
-
Electrical is the only way forward.. But until we get...
By Batpred , 9 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Manufacturer: Panasonic Model: WH-WXG12ME8 Type: AS...
By Andy-e , 9 hours ago
-
In our installation, we actually have an LLH but any di...
By Toodles , 9 hours ago
-
RE: Large heat pump options for church building
This church project has more in common with a commercia...
By GrahamF , 10 hours ago
-
RE: How good is the app support for your heat pump?
It looks quite interesting and, like you, I'd only want...
By Sheriff Fatman , 10 hours ago
-
RE: External wall insulation - your experience
So our house is in SE England. We mainly had mixed w...
By Batpred , 20 hours ago
-
RE: 5 Star Service from Havenwise
@majordennisbloodnok and @benson Good suggestion! We'll...
By HCas , 21 hours ago
-
RE: Midea ASHP – how to set weather compensation
@pash44pump - pull the data from the data loggers and s...
By cathodeRay , 1 day ago