Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Nov 12, 2026
@cathoderay I did some maths over my lunchbreak and I think I've got an explanation for why there is a polynomial in the relationship. I think it is...
I also found other forms of the curve that better fit the data when doing my EDA, many of which confused the hell out of me, including the polynomial ...
@cathoderay I've made a few modifications having looked through your posts. First, the problem with applying the "no setback" model to the "yes setb...
So I did a quick model in R on the hourly data, and I found that the setback period used 1% less electricity than the model suggests would have been u...
This is absolutely the right question to ask, and then to follow up - so what should your should your strategy be for raising and lowering the set tem...
You could try increasing the tank target temperature so that, even if it's 3C below and doesn't trigger, it's still hot enough for long enough to supp...
I'm on Intelligent rather than Cosy, but I have automated my heat pump to boost the flow temp by 5C during the cheap period. I don't think it's game c...
It's also 2.4kWh extra heat generated in your home (assuming the circulating pumps are inside the thermal envelope of your home).
If we're getting R-squareds of 0.9 with just the OAT vs energy consumed, then we're probably not going to be able to discern a 5-10% difference in ene...
This was my experience too, and our installers removed the FTC6 and replaced it with an FTC5. Otherwise, I believe, you have to invest in the dedicate...
@jamespa I think it is better to measure energy consumed of course, but then you also need to take into account things like Time of Use tariffs. For e...
There's really no meaningful difference between those two lines at all. People can set their setbacks if they want and not worry about it, or people c...
- 27 Forums
- 2,816 Topics
- 66.7 K Posts
- 1,656 Online
- 7,230 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
Should I change my cylinder when changing from a gas boiler to a heat pump.
I have 178 L Gledhill unvented cylinder which was fitte...
By David , 6 hours ago
-
RE: Plug and play solar. Thoughts?
Impressions so far from the one I've installed are that...
By EtchedPixels , 7 hours ago
-
-
@batpred The Daikin temperature probe protrudes from th...
By Toodles , 11 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor And as an occasional contributor, may I say wel...
By Toodles , 13 hours ago
-
RE: Should Households Who Can Afford It Pay More for Energy to Help Those Who Can't?
They don't have to try. Our entire system is d...
By EtchedPixels , 13 hours ago
-
RE: Why don't people choose heat pumps?
Fair enough. I guess I was thinking of pipes that run ...
By JamesPa , 13 hours ago
-
RE: How Can I Prove Coal Was My Main Heating Source Without Receipts?
Got excepted for the grant now so thanks for the replie...
By Chilli304 , 17 hours ago
-
Daikin Altherma 3 R F+W, room thermostat control, weath...
By JanHarley , 18 hours ago
-
RE: Buffer tank on a 2 x 14kw Ecodan system
Pretty much as I had guessed in my crude scaling from m...
By JamesPa , 21 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Well you have a vibration generator running at some fre...
By bobflux , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@downfield Thats a decent rate, I’m shocked they hadn...
By Papahuhu , 2 days ago
-
RE: Adventures in heat loss calculations
@toodles thanks! So as suspected, around a doubling of ...
By SusannaSaunders , 3 days ago
-
Six books in three years and I think I’ve now covered j...
By Mars , 3 days ago



