Forums

Forums
Members
Rod
Activity
 
Notifications
Clear all
Rod
@rod
Member
Trusted Member
Joined: Jan 9, 2023
Last seen: Oct 11, 2024
Profile Activity
Topics: 1 / Replies: 23
AllTopicsReplies
Reply
RE: Heat pumps and on/off working - starting to quantify it

We have some towel rail radiators which are connected directly to the HP flow/return and mixing valves ar the underfloor manifolds - I would expect th...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Heat pumps and on/off working - starting to quantify it

I use one of these with the device in a fused-spur surface-mounted box next to the consumer unit, and the sensor clamp around the live to the pump in ...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Heat pumps and on/off working - starting to quantify it

It would be useful to see the real-time energy going into the pump from a Watt meter, it might show something. I attach one of mine below, mine also c...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Heat pumps and on/off working - starting to quantify it

For my system, the issue with a setback isn't so much the LWT, it's the delta between the LWT and RWT: the compressor runs a lot harder in the warmup ...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Looking for an Ecodan Expert

@tfb8 If the Winda is still sending control signals, then the relay setting for the Wunda zones must still be set in the Wundasmart app; You can remov...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Looking for an Ecodan Expert

If I'm understanding you right, are you saying you just want to control the system off one thermostat? If so, you can do this using the WundaSmart app...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Minimum Run Time, Flow & COP

@kev-m Yes, it's in heating mode. For reasons I still don't understand the HP can spin up to do a DHW cycle when the tank temp is very close to setpoi...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Heat pumps and on/off working - starting to quantify it

Following some of John Cantor's videos explains why cycling gently (2-3 times/hr) is actually just creating an average lower flow temp. Our pump cut...

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Minimum Run Time, Flow & COP

Mitsubishi provided the flow chart below, after quite a lot of back-and-forth trying to explain the high flow temps and power spikes.

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Heat pumps and on/off working - starting to quantify it

We're at over 6 some days, with low flow temps between 23 and 25 - happy days!

2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Topic
Ecodan Minimum Run Time, Flow & COP
2 years ago
Forum
Air Source Heat Pumps (ASHPs)
Replies: 6
Views: 2681
Reply
RE: Air source heat pump roll call

Rod Forum Handle: Rod Manufacturer: Mitsubishi Model: Ecodan 11.2KW Type: ASHP Arrangement: Mono Area of Country: Kent Home Type: B...

3 years ago
Forum
Air Source Heat Pumps (ASHPs)
Page 2 / 2
Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →