Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 18, 2026
Agreed, these plug-in systems are little more that a portable battery into which you may be able to plug in and run your fridge/freezer during a power...
Do you have the Tesla One App configured that the installers use? If so, you can connect directly to the PW3 over it's internal WiFi controller and ru...
The Tesla Gateway sits between the incoming supply and the CU, so I would postulate that Pair A go to the Gateway with Pair B returning from the Gatew...
I'm sure @transparent will give you a more qualified answer, but I would expect to see either (i) an RCBO, or (ii) a MCB and an RCD (which when combin...
@chandykris Yes, I saw there is a savings session tonight, at 8-9pm They are 'paying' 137 Octoplus points = 17.125p, so not too bad. Unfortunately...
I agree, there is no clearly best/targeted tariff for fully electrified households with EV's, ASHP, solar and batteries. Have you requested this to ...
They will be entitled to constraint payments to cover their losses, but you are right that investment would evaporate overnight if the goalposts were ...
@papahuhu getting back on track (no pun intended!), I can report that my effective export rate on Flux is averaging around 75% higher (~21p) than it w...
Correct, when you apply under G99 the DNO will make you an offer, which you can choose to accept, or not. This offer can be literally anything, and it...
Hmm, I think the last 25 years may disagree with that statement.
To answer your question, I'm not sure they can reduce your offer and anyway, you are allowed 3.68kW of export under G98 so you can always revert to th...
On the right tariff, there is no reason a well installed heat pump cannot be significantly cheaper than gas (or oil) to run. The bills would be big no...
- 27 Forums
- 2,769 Topics
- 65.3 K Posts
- 2,465 Online
- 7,172 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Heat Pump deployment statistics: June 2026
To my eyes, sat behind all of this is a basic policy ma...
By Temperature_Gradient , 7 hours ago
-
Thank you @majordennisbloodnok – that means a lot, part...
By Mars , 11 hours ago
-
We’ve just passed 20 million forum views! 🎉
It's official. The Renewable Heating Hub forums have of...
By Mars , 11 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
That calculation is reasonable, output is proportional ...
By JamesPa , 13 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
Have you looked at the Nibe website? They list their ap...
By Lizzie , 15 hours ago
-
RE: Why are ASHP installs so expensive?
A not unreasonable position and it wouldn’t be mandator...
By AndrewJ , 15 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 2 days ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 2 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 3 days ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 3 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 3 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 3 days ago
-



