Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Mar 5, 2025
EPC results are in. We got a 73 (C) with recommendations for additional floor insulation and solar. Nothing on wall or loft insulation, so it looks ...
Got it. Thanks
Returning to the LLH/PHX question, would it be fair to say that these things essentially trade performance (efficiency) for robustness? I guess if ...
Yes. That would just drop the curve on the graph, so you'd have to re-label the axis to compensate. The idea of subtracting a constant from the resul...
Thanks. That's helpful. Learning slowly.
That's a shame. I was beginning to veer towards Midea. What's the issue with freedom/LLH/PHX? I obviously need to do some more research, but could y...
Great data. I look forward to being able to generate some like it myself one day. I might be getting carried away in my excitement, but it looks...
He can have it written down on a piece of paper - guaranteed to be right twice a day
@jamespa Good idea. One other thing that I haven't mentioned is that 5 of our radiators are on 10mm microbore plastic, while the rest are on 15mm c...
Thanks for the comprehensive list Ian. All of the rads already have TRVs (apart from one in hall where the main thermostat is located). The advice ...
Thanks again for all the good advice. One company did mention that they would need to look at the DHW pipes, which appear to be 28mm at both ends bu...
Thanks all for your insights. @sand Did GL do the original installation in your case or were they just called in afterwards to advise? Also, how l...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Renewables & Heat Pumps in the News
Yes, I am a member of the SEC, and therefore aware of t...
By Transparent , 34 minutes ago
-
RE: How quickly would you want/expect heat recovery to take from setback?
I agree it looks like a traditional fossil fuel boiler,...
By cathodeRay , 46 minutes ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
Come for the low-carbon homes. Stay for George Clarke’s...
By Mars , 4 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
@razz, as we head into the heating season, I just wante...
By Mars , 6 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
Not quite, regular A2W heat-pumps need a load of extra ...
By Temperature_Gradient , 2 days ago
-
RE: Heat Geek installations: share your experiences
one thing i learnt from reading people’s comments and e...
By Batpred , 2 days ago
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 2 days ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 2 days ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 2 days ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 2 days ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 2 days ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 2 days ago
SPONSORS
