Last seen: Dec 1, 2022
@justinsb, @kev-m I've just realised what is happening here. This display is showing you what the flow temp will be at any given outside temp. So ...
Whenever I try to download the CSV data it totally ignores the date ranges specified and always gives me the first 3 months or data. Are you able to d...
@kev-m What software are you using to collect this data and generate these charts?
I have a 250l tank, set to 50ºC with a 5º drop to reheat setting. Two of us in the house. On average it seems to use about 2kWh per day. Where is th...
Morning, after setting up the curve with you and turning all thermostats up to 30ºC I saw the internal temp beginning to rise so I notched it down to...
(@kev-m) could you also tell us how you are generating the non MelCould chart? Thanks.
Apparently the curve preview button does display the correct settings. 50ºc @ -5 and 20ºC @ 20ºC looks like this
@justinsb Just out of interest, on the screen where you can preview or adjust your curve, if you press the preview button F3 what curve settings...
Feel the fear! 😉 Select Yes to system shutdown, then follow Dereks notes. You will see a screen like this: When you are finished just keep pres...
Skype is good. I'll send you a direct message with my username.
Hi @derek-m. How would you like to go about us setting up my compensation curve?
Outside temps for each of the testing days. 19/01 - 24/10 02/11 - 07/11
Latest Posts
-
RE: New Fogstar 15.5kWh upright solution
Thank you. The way that framework splits between 1 an...
By Batpred , 5 hours ago
-
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH
@jamespa thank your for your input.We used the heating ...
By bonobo , 7 hours ago
-
The Mars and Richard Kitchen Show
Just stopping by to say: 1) Mars I'm so sorry that yo...
By Lucia , 7 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
Thanks both. I’ll push gor thr glycol, 5% is 5% i cant ...
By Crimson , 8 hours ago
-
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
My circulation pump cycles, when the compressor is off,...
By KenBone , 8 hours ago
-
RE: Odd noise in our Ideal Logic ASHP
Should have all you radiators and con...
By KenBone , 8 hours ago
-
RE: Automation options to maximuse efficiency & ToU tariffs
If you are asking what is available to the non geek hou...
By JamesPa , 9 hours ago
-
Yes, you make a good point and beyond servers, engineer...
By Batpred , 10 hours ago
-
RE: Isolating the system for a planned power cut
Insurance helps and when adding high powered devices li...
By Batpred , 12 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
Is there a lookup facility to see your limit, or is it ...
By DREI , 18 hours ago
-
RE: Electricity price predictions
Without getting too much into politics, given that the ...
By Batpred , 18 hours ago
-
UK Consumer Law Reality Check (for anyone dealing with ...
By DREI , 18 hours ago
-
@dgclimatecontrol Thanks... this was resolved back in M...
By Sandman1600 , 18 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
That's the problem with the UK, in comparison with Amer...
By DREI , 19 hours ago
-
Electrical is the only way forward.. But until we get...
By Batpred , 19 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Manufacturer: Panasonic Model: WH-WXG12ME8 Type: AS...
By Andy-e , 19 hours ago
-
In our installation, we actually have an LLH but any di...
By Toodles , 19 hours ago
-
RE: Large heat pump options for church building
This church project has more in common with a commercia...
By GrahamF , 19 hours ago
-
RE: How good is the app support for your heat pump?
It looks quite interesting and, like you, I'd only want...
By Sheriff Fatman , 20 hours ago
-
RE: External wall insulation - your experience
So our house is in SE England. We mainly had mixed w...
By Batpred , 1 day ago
