Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 17, 2026
Sorry my mistake, I didn't read the original post!
My feeling is that Octopus will be wanting to sort this so I wouldn't despair, instead I would be patient but firm and, as @mars says, I wouldn't pay....
FWIW the ramp with my Vaillant up occurs shortly after the cloud of vapour appears, so its during the 'recovery' phase. I have always assumed that th...
Agreed Agreed, an essential part of setting up a WC curve correctly I don't agree with this unless you want your rooms to be at 16. Assumin...
There is a thread from a year ago where this was debated at length and the conclusion, well argued imho, was flow is better but it's likely only to ma...
Yes it does, but you can disable it. Sensocomfort-Settings-Installer Level-Installation Configuration-Circuit 1-Room temp mod. Set to inactive to ru...
Check them. Filters, particularly the fine mesh filter if you have one (it may be inside the case) block up quickly. Mine blocked up to the point th...
Thanks for the info. Volumiser configuration should be OK, a little concerned the rads are original it suggests some may be undersized. OK, difficu...
As you now have a Heliotherm engineer on the case I wont comment further. As @mars says this is high end stuff, the suppliers need to be made to work...
OK. Well in case you haven't already the first thing to do is to disable all room influence and turn the WC curve down as far as you can until the ho...
The larger house might turn out slightly more efficient due to increased system volume, but I'm basically on the same page as @majordennisbloodnok.
Latest Posts
-
RE: DIY Heat Pump Installations: Navigating Legal and Regulatory Hurdles
@transparent I thought you would spot that wind turbine...
By Batpred , 22 minutes ago
-
UK warm homes plan - how can it be delivered?
@editor Sobering thoughts on your article on the workfo...
By Batpred , 2 hours ago
-
RE: Debugging my legionella immersion heater
To conclude this story, I hadn't realised that immersio...
By Prunus , 5 hours ago
-
RE: Setback savings - fact or fiction?
You are right to be intrigued by it IMHO. SOFAIK it is...
By JamesPa , 9 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@swwils there is no logic to oversizing a heat pump. It...
By AgentGeorge , 11 hours ago
-
RE: Vaillant Sensocomfort Time
Thank youy for the pointer. I think I have managed to ...
By ispookie666 , 1 day ago
-
RE: Forum updates, announcements & issues
I have been doing a lot of work on the site lately and ...
By Mars , 1 day ago
-
@majordennisbloodnok good advice, thanks for that.
By David999 , 1 day ago
-
RE: My Grant R290 9kW Heat Pump Installation
I am following this thread with great interest and than...
By TaffontheTaff , 1 day ago
-
RE: Sizing an ASHP; Heat loss and kW
You can't measure heat loss with a website. But you ca...
By JamesPa , 2 days ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — I have a sort of residual interest in this pr...
By cathodeRay , 2 days ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 2 days ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 2 days ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 2 days ago
