Activity
 
Notifications
Clear all
JamesPa
@jamespa
Moderator
Illustrious Member
Joined: Apr 3, 2023
Last seen: Aug 6, 2025
Topics: 17 / Replies: 2678
Reply
RE: Commencing on an ASHP Installation Process

Correct. However unofficial data suggests this ignores defrosts and you might have to derate by 10-20pc when it's defrosting a lot, which in fairness...

3 months ago
Reply
RE: Commencing on an ASHP Installation Process

A couple of hopefully helpful comments Vaillant 10kW is the same as the 12kW, just software limited. A neighbour of mine was borderline 7/10kW an...

3 months ago
Reply
RE: Planning Update: 1 Metre Boundary Rule for Heat Pumps Has Been Scrapped

The order, despite it's title, appears to apply to England and Wales, see article 1

3 months ago
Reply
RE: Say hello and introduce yourself

Yes but we have to deal for now with the world as it is not as we would like it to be (whilst seeking to change it at the same time) Householder ...

3 months ago
Reply
RE: Say hello and introduce yourself

Yes that's true of course Unfortunately installers all too frequently don't use the correct numbers, and it's not always possible to tell, which is...

3 months ago
Reply
RE: Say hello and introduce yourself

It's not really that bad if you just take it methodically, using the knowledge on this forum, and have confidence in your own ability to think logical...

3 months ago
Reply
RE: Say hello and introduce yourself

@matwin This post is a real world example of the effects of oversizing and buffers. It's worth reading it and the subsequent discussions.

3 months ago
Reply
RE: Say hello and introduce yourself

My gas consumption was 18-20MW/yr. It was 10% higher before I turned down the flow temp to 50 (from 75 which is where the maintainer left it) and sta...

3 months ago
Reply
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy

That's a curious conclusion with which I am struggling, not least because I have a fairly comparable situation which doesn't seem to create a conflict...

3 months ago
Reply
RE: Say hello and introduce yourself

I don't have much concrete evidence but The only way to explain the discrepancy between my calculated and actual heat loss is to assume ach =0.5 i...

3 months ago
Reply
RE: Say hello and introduce yourself

In addition to the above oversizing means you are likely to be running the compressor at an inefficient point on it's modulation curve for much of the...

3 months ago
Page 22 / 226
Share:

Join Us!

Latest Posts

Members Online