Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 11, 2026
I think the mixergy coil is quite small, they sell an add on circulator and phe for heat pumps. I don't know how Samsung's algorithm works but is it ...
If its set to active then the HP will adapt the WC curve (to an undisclosed extent and with an undisclosed timescale) to achieve the set temperature, ...
FWIW my flow crashed when I started my system up in July to attempt cooling for the first time, the space heating part of it having sat around doing n...
If you screw them right down yes, but not if you don't. The ones that came with my TRV4s actually have moulded arrows on them labelled ,+/-
I dont have them I balanced on the LSVs. Its a bit fiddly because they typically only make a difference in the last turn to half a turn (see heat Gee...
No vibration issue. However when its minus temperatures and compressor modulation >80% there is noticeable compressor noise. The rest of the time...
My single Mitsubishi ilife2, which is otherwise perfection, suffers from exactly this problem and the threshold (30C) isn't adjustable. I've just (ye...
The first chart in your post above shows average 0.25kWh consumption. The second confirms that the unit is delivering less than 1kW output. Yet the ...
You should be getting better than that at this time of year even though it will be cycling, unless it's really cycling a lot (short cycling). Can you...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Replacing Storage Heaters with a Heat Pump in a Stone Cottage
All very true. Personally I also put a fair amount of w...
By cathodeRay , 1 hour ago
-
RE: tepeo ZEB UK Support & Info Thread
OK so ZEB is basically a variant on a storage heater, b...
By JamesPa , 17 hours ago
-
RE: PV and battery long payback - sense check query
@energystoragetech it's highly improbable that @davidb ...
By Transparent , 23 hours ago
-
RE: Heat Geek installations: share your experiences
@editor I suspect that the Heat Geek online quote is a ...
By AndrewJ , 23 hours ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
Ah, yes. Thanks for clarifying.
By Transparent , 23 hours ago
-
RE: Vaillant ecoTEC Plus - Flow Temp and Set Up
@trebor12345 I have been meaning to get home assista...
By Batpred , 1 day ago
-
RE: Indevolt Batteries UK Support & Info Thread
SunSynk hybrid inverters also have the capability to as...
By Transparent , 2 days ago
-
RE: Is This Initial Free Quote From Octopus Trusted Partner Reasonable?
If you've got a sash window or a door you can remove th...
By EtchedPixels , 2 days ago
-
RE: Are We Sleepwalking Into Another Race to the Bottom?
Roughly how most air/air is done except that step 3 doe...
By EtchedPixels , 2 days ago
-
RE: Nook batteries from Octopus
@batpred If your energy use is low enough that just get...
By EtchedPixels , 2 days ago
-
RE: Missing flow temperature in Heat Geek proposal
I suspect 4 yrs ago, their approach had not got to this...
By Batpred , 2 days ago
-
RE: battery storage without solar
Also don't forget that in you may not be able to use th...
By JamesPa , 2 days ago
-
RE: Tesla Powerwall (2) Calibration Cycles
One practical safeguard is to separate the calibration ...
By EnergyStorageTech , 2 days ago
-
RE: Getting closer to a finished Haier system
Apart from sealing the external Primary Pro joints and ...
By Singlespeed , 3 days ago
SPONSORS
