Forums

Forums
Members
JamesPa
Activity
 
Notifications
Clear all
JamesPa
@jamespa
Moderator
Illustrious Member
Joined: Apr 3, 2023
Last seen: Jul 20, 2025
Profile Activity
Topics: 16 / Replies: 2631
AllTopicsReplies
Reply
RE: Remaining hot water/hot water flow meter

I think you first sentence is spot on, stored DHW is just different to on tap DHW from (presumably) a combi. Not worse, not better, just different. ...

1 month ago
Forum
Domestic Hot Water & Cylinders
Reply
RE: I don't need any heating in the summer. How do I turn my Samsung heat pump off?

I should perhaps clarify my thoughts in view of the comments from @old_scientist (with whom I agree). @quakerquaker asked 'Q1 - is maintaining the w...

1 month ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Remaining hot water/hot water flow meter

Rainfall showers can be 20l/min and stored water at mains pressure/3bar generally flows faster (possibly a lot faster) than anything coming out of a c...

1 month ago
Forum
Domestic Hot Water & Cylinders
Reply
RE: Flow Rate & Low Loss Headers

tricky that, I cant say I have a solution. Fair enough. Its all a bit crazy IMHO. You can have a 13kg bottle of propane in a garage or on...

1 month ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Air Changes per Hour - ACH and the MCS requirement

@ashp-bobba Talking of over-sizing (and if you dont mind me asking) what do you suggest for a load such as 3-4kW. There is another thread where this...

1 month ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Flow Rate & Low Loss Headers

I definitely wouldn't want that near my bedroom (which is where my DHW tank is) but as you say in a kitchen area is OK Lots of installers certain...

1 month ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: I don't need any heating in the summer. How do I turn my Samsung heat pump off?

Q1 - Yes, thats why the tank is well insulated, the amount of energy lost is pretty small. That said, as you know when you use most DHW, why not do s...

1 month ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Remaining hot water/hot water flow meter

You could do a sensor near the top (it would need to be inside the insulation so can you get at it and how would you use it to signal you) but there i...

1 month ago
Forum
Domestic Hot Water & Cylinders
Reply
RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler.

That's great and in principle I wouldn't disagree, but if someone is being quoted 18K to fix a heating system then I can fully understand their reluct...

1 month ago
Forum
Grounds Source Heat Pump (GSHPs)
Reply
RE: Air Changes per Hour - ACH and the MCS requirement

@ashp-bobba My personal perspective on this, based on my own experience and the sad stories I read on this forum, is that the industry as a whole (I'm...

1 month ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler.

What's to stop you simply replacing the heating bit with an ashp. Presumably all the emutters etc are fine so it's just a straight swap of heat sourc...

1 month ago
Forum
Grounds Source Heat Pump (GSHPs)
Page 12 / 222
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online