Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Apr 29, 2025
@derek-m Power Reading fault may be caused by interference! Probably from the Capacitive Motors, with the Grundfoss Motors being Capacitive NOT i...
@derek-m & @jamepa Red face Time..... again! You are correct derek I have made an error in reading the Power from the wrong register within th...
@jamespa COP and REAL COP: COP ? My Measurement of the Heat Pump COP is: COP = Energy Generated as displayed on the Samsung front panel u...
@jamespa Power and Energy measurements The Power measured by my sharky Water Power meter was on the 10th sept: The Power shown at the...
@derek-m & @jamespa Additional observations on the Heat Pump performance and adjustment on the evening of the 13th Sept 24. 1) Adjusting...
@jamespa & @deerek-m Results from evening of 13th Sept 24. Legionnaire Warning Despite not using the Hot Water , because of the expenses...
@jamespa James , I am reminded of a farcical incident where a "NIC Engineer" accompanied by "Two Engineers" from my "installer" visited my house to...
@jamespa Yes James. I am currently: 1) using the [+15:+25] and [-5:45] Water Law Defining Coordinates. 2) No using the Buffer. 3) Not using...
@jamespa I Stand Corrected! Honestly, after two and half years I did not believe that the Heat Pump Could or should be run from a Water Law grap...
@derek-m Power, energy and flow rate metering: 1) Power within the water system I use a Sharky to measure the power carried by the water s...
@jamespa & @derek-m Samsung sensor Maps by Timothy Pont @derek-m Please look at the map of my Samsung with the Temperature Sensors added....
@jamespa & @derek--m !! Negative loss !! My Energy loss for yesterday , incredibly, show an negative loss: This Negative loss is caused by...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
Volumisers are normally plumbed so that they are in the...
By JamesPa , 3 hours ago
-
@toodles possibly. The £9k labour charge for 4-5 days w...
By AndrewJ , 7 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 11 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 1 day ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
SPONSORS
