Last seen: Jan 14, 2025
@davesoa all of those are good things to get done prior to changing the source to a heat pump, and I did a number of those things myself prior to doin...
what I am saying to you is that you appear to have clear logically provable evidence that your particular samsung controller board is faulty on its PW...
@iantelescope so by that logic, the pumps are fine but the PWM source (samsung control board) isn't. I have a PWM source that in theory is the same as...
@iantelescope so according to the logic of this (Correct me if I'm wrong) you've proven that the radiator-side pump modulates as expected with a PWM...
@bontwoody pump definitely runs at lower power when PWM'd down. what the effect on COP is I am not personally qualified to comment but there is plenty...
I've seen that commentary from graham before that the Samsung G6 PWM doesn't work. it 100% does , I guarantee it , at least on my G6 system, with a UP...
cylinder goes on the shelf and you crawl under to get at the plumbing? nice! 😀
so, found time to get back to this now. my house is fully on the ASHP including DHW, and I've installed an ESP32 board to talk to the modbus controlle...
@derek-m its all in the grundfos documentation and there's a standard for it as well VDMA Einheitsblatt 24244. page 17 of the relevant grundfos pump m...
@bontwoody @jamespa I also have the same background and interests. I guess it's not a coincidence that we all ended up in exactly the same place in te...
@iantelescope ok, I think I follow, but I'm not sure of the accuracy of a simple voltmeter in tracing the detailed behaviour. as it is a pulsed signal...
@iantelescope as per previous, my pump , UPMM type, has no LED's. the obvious indicator of "is PWM working or not" is that with PWM heating profile,...
- 26 Forums
- 2,364 Topics
- 53.6 K Posts
- 206 Online
- 6,029 Members
Join Us!
Worth Watching
Latest Posts
-
RE: ASHP sizing - value of Heat Transfer Coefficient
Sorry, but I cant see what the point of this is unless ...
By JamesPa , 12 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
TC Thermostatic Radiator Valve TRV Plastic Decorators S...
By Toodles , 16 hours ago
-
RE: Ecodan unable to hit legionella target temp - what's the consensus?
UPDATE: Thanks everyone who commened with suggestions h...
By 9jwr9 , 20 hours ago
-
-
How long will your energy contract last?
Some heat pump tariffs don’t run as long as a heat pu...
By Toodles , 3 days ago
-
@morgan They are unsupervised these days, can’t get the...
By Toodles , 3 days ago
-
-
RE: Setback savings - fact or fiction?
Exactly. We only need to compare conditions, to decide ...
By cathodeRay , 4 days ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I found because I have very low heat loss I can set bac...
By RadWhisperer , 4 days ago
-
RE: Need Help Optimising My Rushed ECO4 Install: 12kW Bosch Heat Pump
Welcome @mickamills We too have an oversized 12kW Sa...
By Old_Scientist , 4 days ago
-
RE: My Powerwall 3 Consumes 3-4 kWh/Day in Self-Consumption: Is This Normal?
@caron I can confirm that the power usage of the PW3 is...
By Old_Scientist , 4 days ago
-
RE: Speedcomfort radiator fans
Thats true, but having tried (and succeeded) in constru...
By JamesPa , 4 days ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
@bash brilliant, thanks for the feedback
By energy9165 , 4 days ago
-
RE: Heat Pump Heats the House… But It’s Not Cosy. Emitter Changes or System Tweak?
@alastair There I was, feeling grumpy, he said “Cheer u...
By Toodles , 5 days ago
-
RE: Grant Aerona: Is there a setting to keep the 2-port valve open during pump blockade
Depends on OAT. Mine cycles at OAT>10 and of course...
By JamesPa , 5 days ago
-
RE: New Fogstar 15.5kWh upright solution
@transparent My conclusion is as you have noted, tha...
By Bash , 5 days ago
-
RE: Mitsubishi Ecodan R290 10kW performance
And to you too. Wishing you a very enjoyable festive s...
By Sheriff Fatman , 5 days ago
-
RE: External pipework insulation
They do? But that isn't apparent from the photos we'r...
By Transparent , 5 days ago
-
RE: Say hello and introduce yourself
@velcro welcome to the forums. Please feel free start a...
By Mars , 5 days ago
-
Daikin EDLA11D3V3 DHW Settings
I have a newly installed EDLA11D3V3 which I'm still get...
By Velcro , 5 days ago

