Last seen: Jan 14, 2025
It does. I do not claim to be the world authority on PHE's but if you read the public explanations of how they work, full efficiency running a HP acro...
no of course end users shouldn't be doing this. Installers should. Installers should be MADE to put in systems that perform properly and held liable (...
ok no worries . in which case I concur with yourself and hughf, blending valve is the first place I'd check. you should be able to feel the temperatur...
I think the difference between testbed and realworld here vs others is that in say cars, you could never get the MPG advertised (although now there ar...
@swanny also. the pipe insulation in the loft is crap. look at the gaps. Because its in your loft it really matters. it will be at outside temperature...
@swanny ok if the 3rd pump is to boost your the water pressure to the shower then its nothing to do with the central heating, we can forget about it f...
as per mike-h, if you want to be able to temporarily and quickly "boost" your temperature the only easy way (without delving into modbus control) is t...
@swanny the different WL interlinks values are different timing options for the overruns. 3 was what was recommended to me in lots of material I read ...
@editor I voted perfect 🙂
Are you sure you've describe it the right way round? Your description says the cold tap runs hot then lukewarm? Did you mean the hot tap? If so then e...
@jamespa I think the question was from the point of view of "toodles has an LLH, no prospect to do anything different , what should the pump tuning b...
@swanny good progress. 1kw is a good start. the fact its showing 25% on that "inverter pump" number, means it would be trying to slow the pump down if...
Latest Posts
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Ok so that's 35MWh and 32MWh respectively, assuming 10k...
By JamesPa , 3 hours ago
-
@pie_eater I have been thinking of adding cooling to my...
By TechnoGeek , 2 days ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
Hi all, thanks for your help. The installer has confirm...
By Rikiarn , 3 days ago
-
RE: No-code, plug-and-play monitoring for your heat pump
Just in case anyone is looking at Planet Atmo- we've ma...
By benson , 3 days ago
-
RE: Victorian Semi Retrofit / Extension ASHP and UFH Advice
Agree, but you may have a hard time convincing them, as...
By JamesPa , 3 days ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Hi - fyi - there's a dead image link in the 'Optimal In...
By seatonian , 4 days ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@chandykris Horses and beggars…. 😉 Toodles.
By Toodles , 4 days ago
-
RE: Cleaning up after gas meter removed
@agentgeorge Likewise in the loft space; we have 300mm ...
By Toodles , 4 days ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
This particular example is one of the worst I have seen...
By JamesPa , 4 days ago
-
-
RE: Fan running in hot weather ...why?
I wonder if it has some kind of pressure transducer to ...
By ASHP-BOBBA , 5 days ago
-
RE: Cooling with Samsung Gen6 and Flow error
@iaack The system isnt running long enough for any cond...
By EcoBaker , 5 days ago
-
@heacol thanks for confirming we can only hope NAPIT ag...
By Bart , 5 days ago
-
Sorry to hear that @bruce. Sadly I’ve heard from multip...
By Mars , 6 days ago
-
RE: Crystal Ball Time: Communal or even Area Energy Storage?
I am invested in a couple of listed energy storage fund...
By Old_Scientist , 7 days ago
-
RE: Who's your electricity provider and what's your tariff?
That would be my biggest commitment -time to gain great...
By SUNandAIR , 7 days ago
-
RE: Who has a V2G EV installation
As has been discussed on other threads, trying to justi...
By Majordennisbloodnok , 1 week ago
