Last seen: Apr 16, 2024
Caution everyone, this manual stipulates the installation of a buffer tank, so, the promised guaranty of supplying sufficient heat, may come at a very...
@ecobaker probably not
Yes, just make sure you have the correct flow rate at all times.
@bontwoody Maybe they have corrected it, I hope so.
@toodles Spot on, mostly from installers therefore end users, someone has to pay for it. However, that is only a very small part of the cost. I ran ...
@bontwoody That flow temperature is pretty close to 45 Deg C (43 deg C), it could be sensor drift that is causing the activation, it is clear that it ...
MCS and Heat Geek are not the same thing. MCS is a standard that any Heat Geek, or any other installer, has to abide by. It is not an installation sta...
@ecobaker They work reasonably well on open zone, just make sure you always have the minimum flow rate. Attached is a manual with the open zone prog...
@toodles The Heat Geek brand is just that, a commercial, moneymaking brand.
@editor It is a physical and practical impossibility to balance a buffer in all instances and with varying loads, flow rates, temperatures and compres...
@nicholab I am not sure I understand what you have said, are you saying that the contract they gave you said it would be expensive to run? That back...
@nicholab According to your oil usage, you are using about 12000 Kw house per year, according to the EPC (which will be woefully inaccurate) you will ...
- 24 Forums
- 1,422 Topics
- 29.9 K Posts
- 11 Online
- 1,206 Members
Join Us!
Latest Posts
-
RE: Issues with Vaillant connectivity via the MyCONNECT gateway
That’s awesome news, well done the hard work paid off. ...
By Drew Pa , 3 hours ago
-
RE: Are Solar Diverters Necessary for Homes with ASHPs and Solar PV?
@editor No, I made one 😀 Loft insulation all...
By Andris , 9 hours ago
-
RE: Observations on my Ecodan's estimates of energy consumed and delivered
@hestia I haven't touched this setting. As I can't dete...
By glpinxit , 10 hours ago
-
@hughf Thanks for that. Ah so they are talking about ...
By IRMartini , 13 hours ago
-
RE: Are Octopuses Slowing Consumer Adoption of Heat Pumps?
@editor We never received a quote; we had numerous emai...
By Toodles , 13 hours ago
-
RE: Ecodan software update. Real or scam?
@abernyte, hmm, must have been a major disruption if 40...
By Mars , 15 hours ago
-
RE: No-code, plug-and-play monitoring for your heat pump
For what it's worth, after my Mitsubishi Ecodan heat pu...
By scrchngwsl , 15 hours ago
-
RE: Installing your own ASHP - DIY
I’m in the DIY camp, completed the install last Septemb...
By HughF , 21 hours ago
-
Riello / Midea - modbus set flow temp
Hi, I’ve got a Riello NXHM 8kW HP with emonHP, all wo...
By stuartornum , 1 day ago
-
RE: Bivalent (or even trivalent!) system design options for a new GSHP installation
@transparent You are a bright spark aren’t you?!
By Toodles , 2 days ago
-
RE: Noise problems with newly installed Samsung 8kW ASHP
That could be the case, depending on where the triple r...
By AllyFish , 2 days ago
-
RE: Say hello and introduce yourself
@irmartini Oh! That’s a great shame.😳 Toodles.
By Toodles , 2 days ago
-
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?
@david999 On the subject of isolation after the battery...
By HughF , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
@robl I've added the screens. Li-Bms screen is accur...
By GGW , 2 days ago
-
RE: SCOP and seasonal variations
I’ve had a long chat with Aaron from Homely Technical S...
By Toodles , 2 days ago
-
RE: Gas Combi to ASHP - Making sense of survey results and proposal.
Many thanks to everyone who has helped with advice and ...
By IRMartini , 3 days ago
-
RE: What is Wrong with our Heat Pump Installation?
With BESS the ASHP is best. Charge battery for free fro...
By AllyFish , 3 days ago
-
@hubb84 Try looking at powerflushassociation.com. They ...
By Toodles , 3 days ago
-
Central heating inhibitor with ASHPs
Have you seen the Heat Geek article and video?
By ChickenBig , 4 days ago
-
RE: Advice on potential HW Cylinder size
@jwilliams89 I would imagine that the MCS would insist ...
By bontwoody , 4 days ago
Latest Topics
-
By IRMartini 14 hours ago
-
Riello / Midea - modbus set flow temp
By stuartornum 1 day ago
-
Ecodan software update. Real or scam?
By Morgan 2 days ago
-
Noise problems with newly installed Samsung 8kW ASHP
By Lokisam 3 days ago
-
Central heating inhibitor with ASHPs
By IRMartini 4 days ago
-
Advice on potential HW Cylinder size
By JWilliams89 5 days ago
-
By Graeme 6 days ago