Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 10, 2026
as @dgclimatecontrol said stand by the indoor controller fire up smart life app and look for the device. You may need to put the device into ...
The RS485 connector is for controlling the device via the modbus protocol which is far more involved but once set up would give you access to all the ...
@polar-bear here is a link to the directions for their app: as it is a rebadged version of the smart life app you should be ok just using the sma...
@polar-bear So I have a done a bit of late night shiraz fuelled internet sleuthing and it looks like the AIROSD ASHP’s are the same or very similar to...
This is awesome, I will take a look at how you can set up the app it will probably entail connecting to the wifi network access point of the heat pump...
If you are interested in getting better control of the unit it may help to get photos of the controller, model number plate on the side of the unit, a...
@polar-bear just done a bit of searching and it looks like this unit could probably be controlled via the Tuya Smart Life app. If you don’t have any m...
Home Assistant also has an auto-entites card so you can have a card that shows all of the entities of a device this is quite useful for finding the ex...
Edit: just had a look at some of my automations and it looks like it is home assistant creating the random entity id’s still worth checking in the non...
@benson can you post an example of your automation please
@benson it is based on an esp32 so yes it is updateable but you would probably need to do it yourself or send it back for an update. I haven’t used th...
lol I have been stalking his repo for a while and am currently building my own smart controller for my Grant Aerona3 Just had a look at ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you are considering phasing the project, then I woul...
By GrahamF , 6 hours ago
-
RE: Siting of the external sensor on a heatpump
Of course had the heat source been a heat pump it would...
By JamesPa , 9 hours ago
-
Never assume, it makes an ass of u and me! OK, tha...
By JamesPa , 9 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 11 hours ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 12 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 2 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 3 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 4 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 4 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago
SPONSORS
