Last seen: Nov 15, 2023
I realise now that the UI is the master and the heat pump the slave. It is also a fact that only one instance of the MSmartHome App can be talking to ...
I would think the Modbus solution is best. It is probably the approach taken by Freedom for their monitoring system. I can’t quite see why it would...
One thing I noticed at about this time is that the time is now back to GMT. I have suspected for a while that the Midea Cloud controls the time becaus...
@cathoderay My Lenovo M710q arrived this morning and is all setup for Remote Desktop. When doing nothing it consumes about 8W! I’m going to get it ...
@cathoderay I have got HA installed using Oracle VirtualBox on an old Lenovo i3. I didn’t want to make it a dedicated server at this stage. It’s still...
I think I mentioned a few days ago that the Midea Documentation that came with mine contained all the details. There is a small booklet called Operati...
I’ve ordered a refurbished Lenovo 710q i5 8GB 256 M2 SSD usff PC which I may either use on the telescope to replace an i3 PC that I adapt for HA. Th...
I got all zones running this morning and looked at output/input power (estimate from the SolarEdge App allowing for house base load), flow rate, flow/...
I think you have very little information to warrant making such statements. There seem to be monitoring problems with systems such as EcoDan and possi...
@derek-m So I might be ok with what I have. It seems the heat thief has a similar temperature drop. There seemed to be benefits in not circulating gly...
@derek-m Well it can reach 34c at times. This is what I have, which I was unaware of until it was fitted. It was designed by the manager to keep the A...
@cathoderay Thanks for your reply. I did at least check the panel as the heat pump was starting from cold. It looked feasible that it was achieving a ...
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Another point I might have made a little...
By Toodles , 2 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
It does indeed look like that, @skyefarmer. There is ...
By Majordennisbloodnok , 6 hours ago
-
RE: Plug and play solar. Thoughts?
Have a read of my previous posts on so-called Balcony S...
By Lucia , 24 hours ago
-
@editor @bart Hi, I can see a few problems with your in...
By Brendon Uys , 1 day ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 1 day ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 2 days ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 2 days ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 2 days ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 3 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 3 days ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 3 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 3 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 4 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 4 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 4 days ago
