Last seen: Sep 19, 2024
Some manufacturers do publish operating data performed during standard test conditions. That is the source of data behind the Modeling Tools I have cr...
Don't worry, the neighbours will complain about the noise and then the heat pump will have to be moved or removed. But having been installed it will h...
The temperature sensor will be inside the controller, unless you have installed a remote unit, so will be of no use for room temperature control. Yo...
Where is the controller located?
It would appear that your heat pump is cycling. Is your heat set for a fixed Leaving Water Temperature (LWT), in Weather Compensation (WC) mode, or ...
@cathoderay Excellent data once more. The fact that the OAT reading appears to increase by approximately 5C during the setback period, would make ...
The reason that I mentioned the cycling was because of the fact that it makes doing an accurate comparison between theoretical and actual that more di...
Could you explain the reason for wanting the heat pumps to run in tandem? I would have thought that if the actual heating demand, is not greater than ...
@cathoderay The Modbus registers are two byte 16 bit long. When displayed in binary the left-hand end is normally denoted to be the Most Significant...
@jamespa Sorry James, I forgot to fully answer your query. The WC Modeling Tool infers that Energy Supply will be a product of LWT and the capacit...
@jamespa Yes, the raw data was kindly supplied by CathodeRay, the accuracy of which I am not questioning. My objective is to try to avoid the comp...
AA mode is designed to keep the IAT constant, so to the controller even 1C setpoint change is a large deviation between desired and actual. This is th...
- 26 Forums
- 2,123 Topics
- 46.7 K Posts
- 97 Online
- 4,531 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: 300 Liter Tank - Do I have to heat it all?
That sounds like change of use from domestic to mixed d...
By JamesPa , 4 minutes ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Oh Good! Pleased to help if I can! Regards, ...
By Toodles , 59 minutes ago
-
It's unclear to me how the Smart Control project work b...
By Transparent , 1 hour ago
-
RE: Have Consumers Been Lied to About the Efficiency of Heat Pumps Made in China?
@pavel, this isn't about discrediting Chinese products....
By Mars , 2 hours ago
-
RE: ASHP heat output monitoring
I installed the heat pump in December '24, so the data ...
By Carlo , 18 hours ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 3 days ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 3 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 3 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 3 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 4 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 4 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 4 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 5 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 6 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 6 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 6 days ago