Last seen: Sep 19, 2024
Has your ASHP been correctly commissioned and optimised, since 5kW seems rather excessive. What are the operating parameters and operating mode? Do yo...
I often wonder where people are being trained these days, assuming that they are being trained at all. I can't say for certain, since I don't know e...
Whether you fully heat unused rooms is a personal choice. ASHP's are more efficient when operating at the lowest LWT, but to get the maximum amount ...
@curlykatie Hi Curly, Just out of interest, how is your system performing now?
@robl Other than what you refer to as DeltaT, is more likely LWT, this is an excellent set of results, and proves what can be achieved with a good l...
Just a further example of the 'tail wagging the dog', when it could have been quite feasible to supplement your heat demand with a simple fan heater ...
The text is much too small to read, but I assume that when you state that the 'peak heat loss 13kW', this mean with indoor temperatures of 21C and an ...
@cathoderay I am not familiar with Python, but I do have experience with data storage and transmission. To store a number, be it an integer or float...
ASHP's are not as efficient as GSHP's, because their primary energy supply, from the air rather than the ground, keeps changing, and can go well below...
@ecodannewcastle Try changing the warm end of the WC curve to LWT of 25C at outside temperature of 20C. What size is your Ecodan? What is the heat...
What are the weather compensation settings?
@cathoderay You may find this of use.
- 26 Forums
- 2,378 Topics
- 53.9 K Posts
- 178 Online
- 6,060 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Radiator sizing sanity check
No chance! Largely, hence my suggestion to do some...
By JamesPa , 9 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
As it turns out this is correct! All I needed to do was...
By benson , 10 hours ago
-
Here is an update of the setback we operate on our syst...
By SUNandAIR , 12 hours ago
-
RE: Grant ASHP 17.5 kw. weather curve
@chinkoa Sorry there are two separate thoug...
By JamesPa , 13 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@transparent As easy as putting sparklers in champag...
By Papahuhu , 13 hours ago
-
@f1p Looks good, and will likely be something I use whe...
By Sheriff Fatman , 16 hours ago
-
RE: Cascade 2x Grant Areona 10kw ASHP - Ongoing setup issues
Either complete Bow Locks or at best a marginal effect....
By JamesPa , 19 hours ago
-
Hi all I’m looking to get some insight on what others...
By Renewables345 , 19 hours ago
-
RE: The Great British Heat Pump Owner Persona Survey: Let's Build Our Archetype!
@mosibi, go on then, complete the survey. Let's get the...
By Mars , 19 hours ago
-
RE: Water Hammer After Heat Pump Install
@jaynieq I wish you luck with this one. I think the ma...
By JamesPa , 21 hours ago
-
RE: Optimum new build house design for Heat Pump
From first principles I would say: Definitel...
By JamesPa , 2 days ago
-
RE: Weather compensation- why you should use it
As good a place as any to drop this video:/p>
By Mars , 2 days ago
-
RE: Forum updates, announcements & issues
@transparent D'Oh - I did look before I posted but I mi...
By dr_dongle , 2 days ago
-
Compatibility with Samsung AE080RXYDEH
I am new to all this. We have a SamsungAE080RXYDEH that...
By John999 , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Maybe you should buy your additional batter...
By Bash , 2 days ago
-
RE: Data Accuracy Problem: Daikin 8kW Heat Pump's Onecta App vs MMI Power Consumption
@nursethescreens Yes, comfort and happiness of the fami...
By Toodles , 2 days ago
-
RE: Connecting Growatt SPH5000 over wired ethernet rather than wireless
Thanks folks. I had tried googling an ethernet lab adap...
By z8lccda , 2 days ago
-
RE: Changing from 4-port buffer to volumizer
@toodles I'm not concerned that the behaviour is not no...
By Andy1618 , 2 days ago
-
-
RE: Setback savings - fact or fiction?
I agree, and I think there are two things in play here....
By cathodeRay , 3 days ago
