Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 3, 2026
That would be useful, to see how the automations and WCC interact, by comparing charts with and without the automations being on.. My hunch is you don...
I am of the same mind. Just wait until Big brother starts playing this game as well, through the 'newspeak' of demand side response. It is currently s...
For the umpteenth time, this is normal Midea and Midea clone behaviour in mild to moderate conditions. It is slow cycling, and no one has ever demonst...
I think you need to be careful with axis scales. The lower chart is what some might call a gee-whizz chart of part of the upper chart. Both show the s...
I presume you mean the big >50 degree peaks: almost certainly DHW heating. Note the set LWT hasn't increased, those peaks happened outside the main...
It seems to me that running it like this is, in effect, running it on a thermostat with the automations doing what a thermostat would do, and the inev...
The real answer is trial and error, because there are a lot of variables, and no two houses will be exactly the same. A good starting point for an ave...
@grantmethestrength - thanks for the contribution, very interesting. Not everyone will want to do this sort of thing, but for those that do, reading a...
I agree, the video lacks context and detail, and the Midea Engineering Data manual is even briefer: "ZONE1 H-EMISSION sets the emission type for hea...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Missing flow temperature in Heat Geek proposal
Quite probably, does the guarantee come with any defini...
By JamesPa , 12 minutes ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Good but - with your recirculating pump a high proporti...
By JamesPa , 3 hours ago
-
RE: Being screwed over by Volkswagen Audi Group
No worries, I can't really argue with your logic and I ...
By Old_Scientist , 6 hours ago
-
RE: 7kW EV Charger Options Advice
Thank you Rusty, all of those subtleties were lost on m...
By Judith , 10 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Flow rate is set by pressure created by the circulator ...
By bobflux , 1 day ago
-
RE: Glass lined Cylinder for private water supply
I have one of those... a Thermal Store. In my case th...
By Transparent , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 1 day ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 3 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 5 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 5 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 5 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 5 days ago
SPONSORS
