Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 1, 2026
You need to set the one shown in the photo you posted to ON, you will then get to choose which weather compensation curve (1-9), choose 9, that is the...
PS by visually merging the two tables as above, I ended hiding your kWh/K column, which does show the values per hour: If you mu...
@adrian — thanks. I'll see what I can come up with. I don't think this is quite correct. The heat loss (and so, when the IAT is stable, the heat ...
It's not actually 'blank' and you have 'ZONE 1 H-MODE HIGH TEMP' (Midea-speak for your main circuit) set to ON as it should be. When it was first set ...
As long standing followers of this debate will know, theoretical assessments of whether setbacks achieve savings tend to suggest the savings are modes...
It is indeed. The same tales of woe can be heard in pubs up and down the land. None of my immediate neighbours has a heat pump (and one has just repla...
@adrian — can you expand a little, and show your actual workings, as I don't fully understand your method? Are you really using °K (Kelvin)? Also be...
Find another bit of metal in the room and put the back of your hand on that, you will then appreciate the rad is warmer that you first thought! Plus i...
To expand on what @benson has said about the lower end of the WCC, thee key point is the curve flat lines either side of the end points: ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: 7kW EV Charger Options Advice
I was hoping that the electrician would route the under...
By Rusty , 3 hours ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
@jamespa @transparent Sorry about that. Here are the ch...
By jon , 4 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Yes, I too am waiting for V2H before I get an E...
By Papahuhu , 5 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Post by: @old_scientist The first thing I would say ...
By Rob of York , 8 hours ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 14 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 2 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 3 days ago
-
RE: Glass lined Cylinder for private water supply
This has turned into a fascinating little rabbit hole. ...
By Mars , 3 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 3 days ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 5 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 6 days ago
SPONSORS
