Last seen: Mar 3, 2025
Could it be mould spores? when the heating comes on it starts warm air convection currents which may well increase exposure?
It’s probably the humidity. Do you have anything which can tell you the current humidity? If it’s less than say 40% you might. Want to pop a dis...
Hold on. If it was set to 21 then it’s quite possible it turned off as the flow temp was met. 21 is very low (it’s not room temp) Look at YouTu...
@gfletcher so that pic shows you have it on a fixed flow temp. 40c is fairly high for this time of year so will be quite expensive. Sounds like you’ve...
Sounds like it might be on room auto adapt mode. Could you take a pic of the FTC controller screen?
That’s a good point about output. I’ve been checking when it’s just ticking over at 25-30c flow temp. I’ll check again when it gets cold. it was...
@editor we had a quote from Global for our 4 replacement ASHP at work. They were Husky units before, so we’d already been caught out once. G...
We decided to let our colder rooms be colder (they need insulating) rather than battle to heat them. Our curve is now 1.0 so our flow has been abou...
How about a sticky post to help people out? take them through the steps Might save a lot of repetition!
Hopefully someone with the same ASHP can talk you through that 🙂 I have a different one I’m afraid.
- 26 Forums
- 2,255 Topics
- 50.2 K Posts
- 578 Online
- 5,915 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
Thanks @grantmethestrength and @cathoderay . The reas...
By benson , 1 hour ago
-
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters
@old_scientist and @allyfish , thank you both for this....
By colinc , 3 hours ago
-
RE: PV Panels on roof in Conservation Area
@jamespa Thanks for the input James, recording Oil usag...
By colinc , 4 hours ago
-
RE: Midea ASHP – how to set weather compensation
@dgclimatecontrol - you have awoken me from my several ...
By batalto , 4 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@jamespa mine seems changing albeit not by much, 3.21, ...
By AdamK , 5 hours ago
-
@majordennisbloodnok The migration hasn't started in th...
By HCas , 5 hours ago
-
RE: Radiator Sizing Dilemma: Vertical vs Type 33 for Low-Temperature Heat Pump Systems
Yep that's it, but the current design would re...
By DREI , 6 hours ago
-
RE: Buying large amp bidirectional RCD and RCBO
There won't be many RCBOs with a 100mA trip rating beca...
By Transparent , 6 hours ago
-
RE: Electricity price predictions
Because its what the investors demand, simple as that. ...
By JamesPa , 7 hours ago
-
RE: One room is colder than the rest of the house
@jamespa thanks for all the advice. Just so you know, ...
By AndrewJ , 9 hours ago
-
RE: Mitsubishi Ecodan R290 10kW performance
@dgclimatecontrol I only have 1 cylinder and I can conf...
By Ecoste , 9 hours ago
-
RE: Daikin Octopus installation update - I saw my first defrost. 😍😂
My MMI is in the loft but I checked the pump flow rate ...
By RadWhisperer , 10 hours ago
-
RE: Grant Aerona 3 and Drayton system questions
Good man/woman that plumber! Very likely....
By JamesPa , 10 hours ago
-
RE: New build installation query
@paullacey Hi I have managed to save the fil...
By JamesPa , 11 hours ago
-
Thanks for the response @batpred Your conversational ...
By Transparent , 13 hours ago
-
RE: What should we do with our Aga?
One slightly off-the-wall suggestion is that, if you li...
By Majordennisbloodnok , 14 hours ago
-
RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus
If you paid for any of the assessments try asking for t...
By JamesPa , 1 day ago
-
I've created a separate post here, wondering about radi...
By DREI , 1 day ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@ecoste, @walnut-tree-cottage these are both great piec...
By JamesPa , 1 day ago

