Activity
 
Notifications
Clear all
ASHP-BOBBA
@ashp-bobba
Member
Honorable Member
Joined: Dec 6, 2024
Last seen: Jul 31, 2025
Topics: 1 / Replies: 202
Reply
RE: MCS heat pump pre-sale information and performance calculation

Perhaps develop a basic software, free online that allows the customer to put in most of the measurements and basic building fabric, just enough that ...

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@jamespa Fair point, its good to know better standards and designs are getting covered under the MCS schemes. Perhaps once it all starts to come toget...

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@iantelescope They say its as a result of the combi birth and delta T changing from 11 to 20! as tech got better it required less flow so all of the e...

8 months ago
Reply
RE: Samsung R290 Monobloc built-in pump - is my buffer tank restricting system SCOP?

@vcosmin Many people here will agree with you on that design issue. I watched the video and if they have 7 or 9m pump you should be well covered.

8 months ago
Reply
RE: Samsung R290 Monobloc built-in pump - is my buffer tank restricting system SCOP?

you will need to set the buffer up as a volumiser for the defrost if the installer has said it needs it for defrost and also make sure you have at eas...

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@editor I will keep an eye out for that podcast, thank you. Just a side note relevant to buffers, rails separators and volumisers. I may not be corre...

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@editor Can you do a podcast on standards of training, whats available, how engineers get trained, where they come from, what level they get trained t...

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@editor I think these podcasts are great. I did watch this one yesterday I think. Lets see if the MI drop buffers in their schematics as options in th...

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@editor I am aware, open loop, less pumps, slow and steady heat generation has proven more efficient, the clever engineering in ASHP is the inverter t...

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@editor Thanks Mars, interesting as most ASHP manufacturers a while back were stating or suggesting the reason for a hydraulic break was to ensure min...

8 months ago
Reply
RE: Samsung E911 intermittent issue

Hi Net, Glad you have found the strainer, hopefully its nicely blocked, quick clean and then get some flow rate back

8 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

@editor has anyone ever posted on the forum, I had a system installed, they did not fit a buffer but it turns out it needed one so the installer retur...

8 months ago
Page 13 / 17
Share:

Join Us!

Latest Posts