Underfloor heating specification for heat pump
Hi.
Long time reader, first time poster.
I've followed a lot of the threads on here with interest and found them really useful in helping to plan for installing a heat pump, but I haven't seen any discussion of underfloor heating other than to say that it is generally considered to work well with ASHPs.
We're in the process of renovating a 1920s semi in the north of England with a view to replacing the gas boiler with ASHP in the next few years when funds allow. We want to install underfloor heating in the ground floor which we are currently working on. We had some heat loss calculations done for the house last year to understand what size heat pump we would need and any upgrading of radiators etc that would be required. We said at the time that we would be installing UFH in the ground floor. The calculations that were done recommended 100mm pipe centres for the UFH to provide sufficient output at ASHP flow temperature of 50°C.
The ground floor is a suspended timber floor throughout. I was hoping to install the UFH using an overlay system on top of the floor boards (I can insulate from below via basement), however most of the systems available seem to use a minimum of 150mm pipe spacing.
I have read elsewhere that 150mm is the maximum pipe spacing recommended for use with a heat pump, so wondering if this will be alright. The heat calcs assume a design temperature of 21°C. We rarely have the heating above 18°C so I wonder if the lower output might be fine for us.
I assume a lot of people on here have UFH with their heat pumps so would be interested to know what pipe spacing people have and if anyone has had issues with the output not being high enough? Also if anyone has recommendations for a good system to use on suspended floors any advice would be much appreciated.
Many thanks!
-
Surface mount or bury primaries for heat pump installation?
4 weeks ago
-
Is this ASHP install OK?
4 weeks ago
-
UFH and ASHPs
2 months ago
-
Installing your own ASHP - DIY
3 months ago
-
Help needed in Essex
3 months ago
- 26 Forums
- 2,114 Topics
- 46.4 K Posts
- 91 Online
- 3,410 Members
Join Us!
Latest Posts
-
RE: No-code, plug-and-play monitoring for your heat pump
By Grantmethestrength , 12 hours ago
-
@eliuccio good to hear you’re happy with the install. A...
By Mars , 21 hours ago
-
RE: Is this just haze or something more?
I am not a scientist nor a meteorologist and I know the...
By Toodles , 2 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
It will improve performance, but by how much depends on...
By Brendon Uys , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
Said I would pop back with a update. Only Mr Jesus h...
By Burtis , 2 days ago
-
RE: Buffers, hot water and cooling
Thats presumably heat pump DT, what about radiator DT a...
By JamesPa , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Exactly the same here. We now have 13.5kWh ...
By Old_Scientist , 3 days ago
-
Compressor and Evaporator Stratification
I have had a few issues with my Hitachi spilt heatpump ...
By trebor12345 , 3 days ago
-
RE: Wood burner with ASHP - direct air?
This depends on the size of your wood burner and size/t...
By Lucia , 3 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn It's a not a buffer it's a volumiser which is ...
By Lucia , 3 days ago
-
RE: Is your heat pump insured?
To make things clear, lots of insurance companies cover...
By Lucia , 3 days ago
-
RE: Boxt Heat Pump Installation Experience
@adrian any updates since installation? How is it perfo...
By Ashfp , 4 days ago
-
RE: Say hello and introduce yourself
Hi @seatonian - Yes, I know Seaton, and I have the Nat...
By Transparent , 5 days ago
-
@seatonian got your email. Will connect you with a reco...
By Mars , 5 days ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 1 week ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (£700!) bu...
By Prunus , 1 week ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 1 week ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 1 week ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 1 week ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 1 week ago