@toodles it a better brand than the MCS had and if it is to be believed install are seeing a significant better SCOP than set by MCS. Also they have a better guarantee of fixing a problem than MCS do.
@nicholab My brother in law is having a heat geek install tomorrow, I will be able to give a first hand opinion after its done. One point in their favour was reducing the proposed size down from 16 kW (EDF proposal) down to 8kW 🤣
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
@nicholab From what I read of the MCS’s ability to guarantee fixing any problems, they have still not erupted their milk teeth! I am very grateful that our install has not required us to ask for their assistance in any way! I hope that forums such as this will in time, encourage the likes of MCS to pull their socks up! Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@bontwoody Just a minor tweak then!😉 (May we look forward to a detailed report in due course please?) Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
MCS and Heat Geek are not the same thing. MCS is a standard that any Heat Geek, or any other installer, has to abide by. It is not an installation standard, it just ensures the installer have ticked a married of irrelevant boxes and claiming lots of fees for the pleasure.Posted by: @nicholab@toodles it a better brand than the MCS had and if it is to be believed install are seeing a significant better SCOP than set by MCS. Also they have a better guarantee of fixing a problem than MCS do.
Heat Geek is effectively a club.
Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.
@heacol If I may enquire please: Where do the funds come from to finance the MCS? Would it be any chance be a combination of the installers and the Government/Tax Payers? Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@toodles Spot on, mostly from installers therefore end users, someone has to pay for it.
However, that is only a very small part of the cost. I ran MCS for over 12 years, the average cost of maintaining compliance over that time was in the region of £2500.00 per installation. On average, I installed between 50 and 100 units a year.
The reason MCS installations are so expensive. It is not the installers making the money.
Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.
@toodles Happy to 🙂
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
@toodles @editor Spent a couple of days at my brother in law's and the WDS Green Energy installation was well organised and tidily done. I was a little surprised by a couple of the choices namely that
1. There were still using antifreeze rather than anti-freeze valves and water
2. The outside piping could have be made half the length if they had entered the garage sooner.
3. A buffer vessel was fitted but configured as a volumiser. When I queried why one was necessary they stated that the warranty would be invalid without it.
The fitters were all advocates of the technology having themselves had one fitted, the oldest guy had a Dimplex 20 years ago!
I will look forward to seeing how well it performs, Mars, did you want another review?
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
All that bare pipework has been lagged/insulated since the picture was taken?
Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.
2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.
@morgan There were doing it as I left, they hadnt quite got it up and running then.
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
@bontwoody A few minus points there possibly then but, please let us know how it progresses. On the matter of the pipe run, isn’t it normal to converse with the householders and plan the shortest practical route? Our installers certainly discussed the proposed pipe run first. Regards, Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
- 26 Forums
- 2,104 Topics
- 46.3 K Posts
- 68 Online
- 3,393 Members
Join Us!
Latest Posts
-
RE: Cooling with Samsung Gen6 and Flow error
@iaack The system isnt running long enough for any cond...
By EcoBaker , 16 minutes ago
-
@heacol thanks for confirming we can only hope NAPIT ag...
By Bart , 2 hours ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@jeff And now for something I have never noticed before...
By Toodles , 3 hours ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@editor If it is of any interest, we had the BUS grant,...
By Toodles , 1 day ago
-
Sorry to hear that @bruce. Sadly I’ve heard from multip...
By Mars , 2 days ago
-
RE: Crystal Ball Time: Communal or even Area Energy Storage?
I am invested in a couple of listed energy storage fund...
By Old_Scientist , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
That would be my biggest commitment -time to gain great...
By SUNandAIR , 2 days ago
-
RE: Who has a V2G EV installation
As has been discussed on other threads, trying to justi...
By Majordennisbloodnok , 3 days ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Thanks @mikeh. Then I will also go back to non smart ta...
By ChandyKris , 3 days ago
-
RE: Location of hot water isolation valve on cylinder
@transparent Thank you so much and very helpful. Earlie...
By rossowheels , 4 days ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
It does indeed look like that, @skyefarmer. There is ...
By Majordennisbloodnok , 4 days ago
-
RE: Plug and play solar. Thoughts?
Have a read of my previous posts on so-called Balcony S...
By Lucia , 5 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 5 days ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 6 days ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 6 days ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 7 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 7 days ago