Notifications

Clear all

Samsung ASHP scheduling help

Sambag · 2023-01-13T10:58:49Z

I have a 12kw Samsung EHS Mono Heat Pump R32 1PH, with Samsung EHS R32 Heat Pump Control Pack and Wi-Fi Control Kit, although the Wi-Fi kit was never installed so the controller sits in my loft with the DHW tank. My Hive is connected up to the system, however, I don't think this is ideal because it can only basically turn the heating on or off. What I would like to do is have a water law set to daytime hours, and either a different water law for nighttime, or somehow to reduce the temperature in the radiators during the night (i.e. setback). On the Samsung controller, I can only schedule on/off/quiet for the DHW, nothing on heating. Does anybody know how to set this up? I'm happy to ditch the Hive if easiest. Thanks, Mark

Page 18 / 20 Prev Next

Air Source Heat Pumps (ASHPs)

Last Post by TechnoGeek 5 months ago

232 Posts

24 Users

27 Reactions

47.4 K Views

RSS

morh

(@morh)

Active Member Member

Joined: 1 year ago

Posts: 8

02/11/2024 6:49 pm

@mike-h exactly as you describe.

hope that helps!

ReplyQuote

Mike H

(@mike-h)

Reputable Member Member

Joined: 4 years ago

Posts: 197

02/11/2024 7:05 pm

@morh It seems odd that F1 and F2 are used for the HVACs, but F3 and F4 are used for the ASHPs, but thanks for confirming this. I will give it a go.

ReplyQuote

morh

(@morh)

Active Member Member

Joined: 1 year ago

Posts: 8

02/11/2024 8:55 pm

@mike-h apologies. Just wire it as the GitHub. F1 + 2. (I didn’t read your post properly…)

ReplyQuote

Mike H

(@mike-h)

Reputable Member Member

Joined: 4 years ago

Posts: 197

02/11/2024 10:13 pm

@morh Thanks for the clarification. That's really helpful.

ReplyQuote

minted_lamb

(@minted_lamb)

Active Member Member

Joined: 2 years ago

Posts: 6

05/11/2024 9:29 pm

@mike-h

As per the pictures from the documentation you wire F1 to A and F2 to B.

Its OK for there to be other wires in F1/F2 (They go to the external ASHP unit)

Yes V1 & V2 as per the diagram to provide 12V to the M5Stack

I found that a 120 ohm resistor between A&B on the M5Stack RS485 base was needed.

ReplyQuote

Mike H

(@mike-h)

Reputable Member Member

Joined: 4 years ago

Posts: 197

05/11/2024 9:39 pm

@minted_lamb Many thanks for that. I am waiting for my M5stack to arrive and in the meantime I have managed to install HA inside VirtualBox, thanks to a brilliant video by Smart Home Australia. EspHome and HA are very much uncharted territory for me. Thanks for the tip about the 120 ohm resistor.

ReplyQuote

minted_lamb

(@minted_lamb)

Active Member Member

Joined: 2 years ago

Posts: 6

05/11/2024 9:48 pm

@morh

Thanks for your excellent work on this an reporting it on this forum. I was going to buy a Homely heat pump controller, but thought I'd start with this and get some more knowledge.

As you created a PR of the original work by lanwin, can you advise if your work was incorporated into the main build now take on by omerfaruk-aran at https://github.com/omerfaruk-aran/esphome_samsung_hvac_bus

Before I fully commit to using it in production, I'd like to aim to be working with a maintained integration.

ReplyQuote

morh

(@morh)

Active Member Member

Joined: 1 year ago

Posts: 8

06/11/2024 9:29 am

@minted_lamb news to me.

I'll probably end up using the new project whenever I feel like updating.

ReplyQuote

Mike H

(@mike-h)

Reputable Member Member

Joined: 4 years ago

Posts: 197

13/11/2024 10:14 pm

@morh I have followed the instructions on setting up the M5stack atom lite on https://github.com/omerfaruk-aran/esphome_samsung_hvac_bus/blob/main/readme.md

Linking .pioenvs/esphome-web-a07180/firmware.elf RAM: [== ] 18.6% (used 60856 bytes from 327680 bytes) Flash: [==========] 110.3% (used 2024497 bytes from 1835008 bytes) Error: The program size (2024497 bytes) is greater than maximum allowed (1835008 bytes) *** [checkprogsize] Explicit exit, status 1 ========================= [FAILED] Took 198.37 seconds ========================= ===== [ERROR] /config/esphome/esphome-web-a07180.yaml =====

ReplyQuote

Mike H

(@mike-h)

Reputable Member Member

Joined: 4 years ago

Posts: 197

13/11/2024 10:50 pm

@morh Apologies for the last post. It added the post before I had finished and I have since managed to reduce the program size by removing the lines related to the bluetooth facility.

ReplyQuote

kocta

(@kocta)

Active Member Member

Joined: 2 years ago

Posts: 6

12/12/2024 9:12 am

Hi all,

I have successfully running ESPHome with the heat pump and the code from @steven

Now I would like to write to the 0x40c4 address PWM, but cant figure it out how

do you have any Tip for me?

- platform: modbus_controller

modbus_controller_id: ashp_modbus

name: "Water Pump PWM"

id: pump_pwm

register_type: holding

address: 0x40C4

value_type: U_WORD

lambda: "return x * 0.1; "

write_lambda: "return x * 10.0; "