Quiet mode: Samsung air source heat pump

Air Source Heat Pumps (ASHPs)

Last Post by Mike H 10 months ago

4 Posts

4 Users

0 Reactions

1,039 Views

RSS

Profzarkov

(@profzarkov)

Estimable Member Member

Joined: 1 year ago

Posts: 50

Topic starter 11/11/2024 9:14 am

Hi, I'm sure it's been asked before but my Samsung ASHP has a quiet mode and a quiet mode scheduling. What does this actually do and is it recommended?

This topic was modified 10 months ago by Mars

Quote

JamesPa

(@jamespa)

Illustrious Member Moderator

Joined: 2 years ago

Posts: 2822

11/11/2024 9:48 am

So far as i am aware it just limits the compressor speed and possibly fan speed thus limiting the output.

4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.

ReplyQuote

Toodles

(@toodles)

Illustrious Member Contributor

Joined: 3 years ago

Posts: 2066

11/11/2024 11:00 am

@profzarkov I don’t think Graham Hendra rates the quiet mode function very highly - just go to reviews and read his article there. I tried to cut and paste the link here, but it won’t work for me. Toodles.

Toodles, he heats his home with cold draughts and cooks his food with magnets.

ReplyQuote

Mike H

(@mike-h)

Reputable Member Member

Joined: 4 years ago

Posts: 197

15/11/2024 9:06 am

Posted by: @profzarkov

↑

Hi, I'm sure it's been asked before but my Samsung ASHP has a quiet mode and a quiet mode scheduling. What does this actually do and is it recommended?

I find it a very useful mode. However, it seems to behave a little bit strangely. When the outside air temperature is above 10 C, then it seems to make the start-up procedure from cold more efficient than in standard mode, and the Water law settings are followed. On the other hand, when the outside air temperatures are much lower, it seems to pay no attention to the Water law settings and the leaving water temperature and electricity consumption gradually rise with the LWT going into the high 40s. This higher LWT and high heat output usually means that the thermostat switches the pump off , so I don’t know what would happen if I left the thermostat on a much higher setting. It also makes heating DHW more efficient, so I would recommend it for DHW heating and space heating when OAT > 10C. Now that it is colder, it will be interesting to see how it compares with standard mode regarding costs.

ReplyQuote