Forums

Forums
Renewable Heating
Air Source Heat Pum...
Planning permission...
 
Notifications
Clear all

Planning permission query - are the 14kw ecodan's a permitted development??

 
Air Source Heat Pumps (ASHPs)
Last Post by Kev M 4 years ago
6 Posts
3 Users
0 Reactions
2,123 Views
RSS
 RV3
(@rv3)
Estimable Member Member
Joined: 4 years ago
Posts: 40
Topic starter 26/08/2021 9:18 am  

Hello all - we're about three weeks away from an installation of an ecodan 14kw. I'd thought that this was covered as a permitted development - this is what the installer advised - also seemed to be backed up by my research.

However - if you fast forward to the 5min 30second mark of this video the guy installer here who seems very well up on things says that the 14kw ecodans are not covered - only the smaller ones in the range.

I've queried this with the installer and will attempt some further research.

Pls can anyone advise? I know a couple of the contributors on here (George and Kev?) have the ecodan 14kw's - did you need to get planning?

Very grateful for any help on this. Sorry - I know planning has been discussed on here before and can vary locally in practice - just trying to check the position as def don't want hassles further down the line etc.

 

Many thanks.

 

 

 

 

 

 



   
Quote
 batalto
(@batalto)
Famed Member Member
Joined: 4 years ago
Posts: 1091
26/08/2021 11:04 am  

I believe the planning permission applies to the sound from the unit

Planning permission, rules for air source heat pumps:As part of Permitted Development Rights planning permission will no longer be required as long as a few rules are adhered too.
 
Only one heat pump can be installed without planning permission if you have 2 units you ALWAYS need planning permission.

The outdoor unit must be less than 0.6m^3 in size It must not exceed 45dBa as measured at the nearest window of the next door neighbour’s property.

It must be installed by MCS installer as part of the MCS scheme.


12kW Midea ASHP - 8.4kw solar - 29kWh batteries
262m2 house in Hampshire
Current weather compensation: 47@-2 and 31@17
My current performance can be found - HERE
Heat pump calculator spreadsheet - HERE


   
ReplyQuote
 RV3
(@rv3)
Estimable Member Member
Joined: 4 years ago
Posts: 40
Topic starter 26/08/2021 11:57 am  

@batalto thanks for this - will try to confirm dimensions.



   
ReplyQuote
 RV3
(@rv3)
Estimable Member Member
Joined: 4 years ago
Posts: 40
Topic starter 26/08/2021 12:02 pm  

Dimensions are 1020 x 330 x 1350 = 0.45m cubed so under the 0.6 quoted above which was the only thing that looked like it might be a problem from the above.

 

Thanks again @batalto

 

 



   
ReplyQuote
 batalto
(@batalto)
Famed Member Member
Joined: 4 years ago
Posts: 1091
26/08/2021 12:30 pm  

@rv3 when in doubt - double check with the local council planners


12kW Midea ASHP - 8.4kw solar - 29kWh batteries
262m2 house in Hampshire
Current weather compensation: 47@-2 and 31@17
My current performance can be found - HERE
Heat pump calculator spreadsheet - HERE


   
ReplyQuote
 Kev M
(@kev-m)
Famed Member Member
Joined: 5 years ago
Posts: 1276
26/08/2021 8:30 pm  

@rv3, I didn't need planning permission for my 14kW Ecodan. As you say, it comes under the 0.6 m3 limit so is permitted development. 


This post was modified 4 years ago by Kev M

   
ReplyQuote



Forum Jump:
  Previous Topic
Next Topic  

Currently viewing this topic 1 guest.



Share:

Join Us!

Login   Register

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →