Forums

Forums
Renewable Heating
Air Source Heat Pum...
Newbie out of her d...
 
Notifications
Clear all

Newbie out of her depth – Samsung AE120RXYDEG 12kW heat pump

 
Page 5 / 5
Air Source Heat Pumps (ASHPs)
Last Post by BAMi 4 months ago
52 Posts
8 Users
7 Reactions
2,832 Views
RSS
bontwoody
 bontwoody
(@bontwoody)
Noble Member Contributor
Joined: 3 years ago
Posts: 836
11/03/2025 6:44 pm  

@jamespa @bami 

Just to clarify, I have already done what James has suggested. My water law settings are as low as I can use.

House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60


   
ReplyQuote
 BAMi
(@bami)
Trusted Member Member
Joined: 4 months ago
Posts: 29
Topic starter 11/03/2025 6:45 pm  

@jamespa I haven't forgotten 🙂  But I want to talk to the tech chap at the installers before I start altering the system, just so they can't accuse ME of being the reason the system isn't running efficiently.

Apart from putting the DHW on a timer, and altering the low end of the weather comp to -2C from 2C the system is as it was commissioned - for now at any rate.


   
ReplyQuote
 JamesPa
(@jamespa)
Illustrious Member Moderator
Joined: 2 years ago
Posts: 2653
11/03/2025 7:06 pm  

Posted by: @bami
↑

@jamespa I haven't forgotten 🙂  But I want to talk to the tech chap at the installers before I start altering the system, just so they can't accuse ME of being the reason the system isn't running efficiently.

Apart from putting the DHW on a timer, and altering the low end of the weather comp to -2C from 2C the system is as it was commissioned - for now at any rate.

No pressure or obligation, this discussion has moved on so much I felt it worth restating in case you had missed it.

 

Installers will probably say touch nothing, which eventually you may have to ignore, but you are imho right to be cautious while you are trying to get them to change things!

 

4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.


   
ReplyQuote



 BAMi
(@bami)
Trusted Member Member
Joined: 4 months ago
Posts: 29
Topic starter 22/03/2025 11:00 am  

Update for those following this thread.

Finally got the 'tech guy' from the installers to email me.  I sent him the plan the surveyor had done, which was completely wrong, and the plan I've done which is correct.

He is trying to tell me that the plan I was sent was just to show the rad sizes and pipe positions and has nothing to do with the heat loss calculation (which I haven't been sent).

I told him that if the BTU for rad sizes has been calculated off the surveyor plan he sent me, in which the room sizes are incorrect, windows are missing and it shows a heat loss outside wall which doesn't exist, how on earth can the rad sizes be correct.  He's still saying they are - which is nonsense.  For starters, the utility is 6.48 m2 and has a 70cm x 80cm radiator, while BR3 is twice the size at 12.24 m2 but only has a 70 x 50cm radiator.  BR3 is always cold.

I asked if the heat loss calculation was done via a different house floor plan and if so why? No response to that!  I've now asked for the heat loss calc and the house plan that was done off.  Will see if I receive it.

He has arranged to come for a visit this Friday, so I'll report back after that.

I don't want to tamper with too much until he's been, but did check the rad valves in the lounge (which is always chilly) and they were closed by a 4.5 turns!  So I've opened both up to max and the rads are definitely getting warmer in there - thanks for this advice.

This post was modified 4 months ago by BAMi

   
👍
1
ReplyQuote
Page 5 / 5
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts