Forums

Forums
Renewable Heating
Air Source Heat Pum...
I worry I've messed...
 
Notifications
Clear all

I worry I've messed my Samsung settings up somehow

 
Page 1 / 2
Air Source Heat Pumps (ASHPs)
Last Post by Joshua 1 month ago
13 Posts
5 Users
2 Reactions
487 Views
RSS
 Joshua
(@terry)
Eminent Member Member
Joined: 4 months ago
Posts: 10
Topic starter 03/06/2025 7:35 pm  

In spring I suffered from an overpowered heat pump causing an excessively hot house due to weather compensation not being able to run cool enough. After consulting here I changed the settings so the thermostats turned it off when the temp got too warm. 2091 to 1.

This seemed to work well in spring stopping the overheating and bringing the monthly electricity usage down a bit. 

Now it's fully warm though the thermostats are never requesting the heat pump to turn on but my electricity usage seems stubbornly high. We tend to get through a fiver a day which we were nowhere near in the August when I first got the heat pump (and it was never in for heating).

I also on occasion walk in and see the water outlet  (which I think is heating not water, but may be wrong) at a high temperature eg 60c

Does anyone have any idea what I may have done wrong?  Or does a fiver a day electricity seen reasonable (5 bed house, 4 people, a few gadgets, HP water heating) in this weather?  Heat pump is a 12kw r290 one.

Thanks in advance

 

 

 


   
Quote
 HCas
(@hcas)
Reputable Member Member
Joined: 1 year ago
Posts: 101
03/06/2025 7:38 pm  

Is the heat pump internet connected? 

I'm asking to know if we could take a look at the data from it remotely. 

CEO and co-founder at HavenWise


   
👍
1
ReplyQuote
 Joshua
(@terry)
Eminent Member Member
Joined: 4 months ago
Posts: 10
Topic starter 03/06/2025 8:34 pm  

It isn't unfortunately

Maybe with investing in the adapter though

This post was modified 2 months ago by Joshua

   
ReplyQuote
 Alfapat
(@alfapat)
Reputable Member Member
Joined: 3 years ago
Posts: 182
03/06/2025 8:43 pm  

Not bad at a fiver , I am 6 to 7 pounds , total electricity and only two of us, I am in scotland , Elgin , so colder nights .

 

No buffer and no Homely or otherwise.


   
ReplyQuote
 Joshua
(@terry)
Eminent Member Member
Joined: 4 months ago
Posts: 10
Topic starter 03/06/2025 8:54 pm  

@alfapat that's this time of year? 

Maybe I'm just expecting too much. 


   
ReplyQuote
 HCas
(@hcas)
Reputable Member Member
Joined: 1 year ago
Posts: 101
04/06/2025 11:22 am  

@terry Hmm makes it tough to figure out remotely what's going on. The water outlet temp shouldn't be 60C though. 

I would say: 

  • Did you try turning the heating off on the Samsung controller?
  • What's the daily energy consumption of the heat pump? You should be able to see that on the Samsung controller under Energy Information if I remember correctly

CEO and co-founder at HavenWise


   
ReplyQuote



 Joshua
(@terry)
Eminent Member Member
Joined: 4 months ago
Posts: 10
Topic starter 04/06/2025 11:56 am  

@hcas thanks, I didn't realise I could look at energy. Usage attached, operation time too

So it seems to be using very little, except for Tuesdays when it does a legionella cycle (would that explain the 60c? Although my 60c photo was a Wednesday)

PXL 20250604 104500761
PXL 20250604 104512768
PXL 20250604 104507398
PXL 20250604 104615243
PXL 20250604 104608742

 So looking at my octopus account my electricity usage is only a tiny bit up on Tuesdays, which makes me think the heat pump isn't a great contributor and I've sent you all on a wild goose chase. 

Sorry but thank you for educating me on my ability to view energy usage.


   
ReplyQuote
 HCas
(@hcas)
Reputable Member Member
Joined: 1 year ago
Posts: 101
04/06/2025 1:40 pm  

No problem

CEO and co-founder at HavenWise


   
ReplyQuote
 Alfapat
(@alfapat)
Reputable Member Member
Joined: 3 years ago
Posts: 182
04/06/2025 2:05 pm  

Posted by: @terry
↑

@alfapat that's this time of year? 

Maybe I'm just expecting too much. 

Yes , this time of year .

Unfortuneately I dont have that facility on a Gen 5 controller as far as I know?

 


   
ReplyQuote
 EcoBaker
(@ecobaker)
Estimable Member Member
Joined: 1 year ago
Posts: 44
10/06/2025 8:40 am  

I had an issue like this last year, when my COP halved overnight,  it turns out I'd unintentionally turned on the electric immersion heater for all hot water. FS 3031

So might be worth checking that out. 

Samsung Gen6 8kw ASHP in a two bed victorian mid terrace.


   
ReplyQuote
 DerekDeLeon
(@derekdeleon)
Trusted Member Member
Joined: 2 years ago
Posts: 23
12/06/2025 12:19 pm  

Looking at the figures on your screenshot, it looks like the legionella cycle is costing you about 18kWh extra on the Tuesdays. 

It takes 17.5kWh energy to heat 300l of water from 10 deg to 60 deg so I think you might want to look closer at your water heating.

The operation time hints that you're using the immerser to do your water heating.

Assuming you are using the heatpump on a not cold tank to do your water heating this electricity consumption seems way off.


   
ReplyQuote
 Joshua
(@terry)
Eminent Member Member
Joined: 4 months ago
Posts: 10
Topic starter 12/06/2025 2:46 pm  

@derekdeleon hello

So you think I'm using the immersion all the time for my water heating. Rather than the heat pump. 

I could see how that would treat the electricity.

Just seen the comment above. I'll  check the setting


   
ReplyQuote



Page 1 / 2
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts