Happy Heat Pump Day
I thought I’d repost this from @grahamh that he posted on social media today because it’s interesting:
Happy heat pump day.
Its the 12th April, the 101st day of the year and today marks the day you will have consumed exactly half your years energy with your heat pump.
So please read the meter and you can see exactly what you will consume over the whole year.
I have used 2070kWhrs since the first of January so my total will be about 4200kWhrs by Xmas.
2022 is going to be an exciting year to be in heat pumps, I see some really exciting developments and new kit and the industry moving in two very distinct directions.
The first is the high install cost, ultra high efficiency, low temperature solution we have been using for the last 10 years, perfect for the purists.
The second is the quick, easy, high temperature, low cost, and low impact (on the house, no rad changes) solution of boiler replacement with lower efficiency's for people who want to go green but without too much fuss.
I dont care which route people take, a heat pump is better than any boiler, its the modern way to heat your house. Happy heat pump day. its ok to celebrate with cakes and fireworks if you want to, you have my permission.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Sorry @grahamh but I'm finding it hard to celebrate when I'm stuck with a system that is less efficient than my old one, and therefore more expensive to run. So I'd be tempted to drown my sorrows with an alcoholic beverage instead!
sounds like you had best call the installer back and get them to give it a tweak, it shouldn't be costing more.
Heat pump builder
@grahamh Ah but Graham, no amount of tweaking is going to reverse if from being a high temp to a standard one? Despite me having a well-insulated (allegedly) house with UFH and Stelrad type rads someone decided a high temp pump was necessary to replace my old Dimplex.
Also, despite all the marketing materials of the new pump banging on about the system being able to perform the legionella cycle without the need for an immersion, mine is wired in so an immersion is involved.
If, as is claimed, this system is better at providing hot water (which tbh I see no evidence of, I actually find it worse), this makes no sense financially either when generally annual hot water demand is much lower than heating demand.
I really wish you still did trouble-shooting diagnostics, I'd book you in like a shot! 😉
- 26 Forums
- 2,114 Topics
- 46.4 K Posts
- 67 Online
- 3,410 Members
Join Us!
Latest Posts
-
Delighted to hear this went well. It looks very neat ...
By JamesPa , 3 hours ago
-
RE: No-code, plug-and-play monitoring for your heat pump
The issue with the Grant is that you have to wire direc...
By Grantmethestrength , 6 hours ago
-
RE: Is this just haze or something more?
I am not a scientist nor a meteorologist and I know the...
By Toodles , 7 hours ago
-
RE: Benefits of an extra horizontal loop for GSHP
It will improve performance, but by how much depends on...
By Brendon Uys , 11 hours ago
-
RE: The good, the bad and the not that great – my heat pump installation
Said I would pop back with a update. Only Mr Jesus h...
By Burtis , 1 day ago
-
RE: Buffers, hot water and cooling
Thats presumably heat pump DT, what about radiator DT a...
By JamesPa , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Exactly the same here. We now have 13.5kWh ...
By Old_Scientist , 2 days ago
-
Compressor and Evaporator Stratification
I have had a few issues with my Hitachi spilt heatpump ...
By trebor12345 , 2 days ago
-
RE: Wood burner with ASHP - direct air?
This depends on the size of your wood burner and size/t...
By Lucia , 2 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn It's a not a buffer it's a volumiser which is ...
By Lucia , 2 days ago
-
RE: Is your heat pump insured?
To make things clear, lots of insurance companies cover...
By Lucia , 2 days ago
-
RE: Boxt Heat Pump Installation Experience
@adrian any updates since installation? How is it perfo...
By Ashfp , 2 days ago
-
RE: Say hello and introduce yourself
Hi @seatonian - Yes, I know Seaton, and I have the Nat...
By Transparent , 4 days ago
-
@seatonian got your email. Will connect you with a reco...
By Mars , 4 days ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 6 days ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (£700!) bu...
By Prunus , 6 days ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 6 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 7 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 1 week ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 1 week ago