Forums

Forums
Renewable Heating
Air Source Heat Pum...
Getting the best ou...
 
Notifications
Clear all

Getting the best out of a heat pump - is Homely a possible answer?

 
Page 33 / 33
Air Source Heat Pumps (ASHPs)
Last Post by benson 3 weeks ago
388 Posts
42 Users
107 Reactions
34.8 K Views
RSS
cathodeRay
 cathodeRay
(@cathoderay)
Famed Member Moderator
Joined: 3 years ago
Posts: 2081
Topic starter 20/06/2025 9:52 am  

Posted by: @benson
↑

I have found a QR code on top of the indoor control panel but this doesn't seem to be doing the trick either unfortunately.

I think that QR code is to download the app SmartHome or whatever it is called). Once you have the app, you have to pair it with the wired controller (which becomes an access point) and your smartphone via wifi. I think it does give you control, but somewhat limited.

 

Midea 14kW (for now...) ASHP heating both building and DHW


   
👍
🫶
2
ReplyQuote
 benson
(@benson)
Reputable Member Member
Joined: 1 year ago
Posts: 122
21/06/2025 1:31 pm  

@cathoderay thanks I have just figured it out. You need to go to the WLAN setting on the Clivet (or midea) control panel and turn on. The control panel then becomes discoverable. I now have the app up and running. It does say that in the instructions in fairness. That'll teach me to read them properly 😆 

The functionality seems fine, so I think this alongside home assistant may work well for us. I'll probably start testing it when it gets colder (and temporarily unplug the homely) to see if I can get the heating working well just by setting the curve and no thermostat, as has been suggested.

This post was modified 3 weeks ago by benson

   
👍
1
ReplyQuote
cathodeRay
 cathodeRay
(@cathoderay)
Famed Member Moderator
Joined: 3 years ago
Posts: 2081
Topic starter 21/06/2025 6:58 pm  

Posted by: @benson
↑

That'll teach me to read them properly

It took me more than a few goes as well, plus some help from this forum!

Weather compensation curve properly tweaked is the way to go (or if not, the best starting point - I ended up adding an 'auto-adapt' script that takes into account the indoor air temp as well, basically bump up the weather curve a bit when IAT below what it should be). Best done when the heating is on, which hopefully it isn't on Midsummer's Day!

 

Midea 14kW (for now...) ASHP heating both building and DHW


   
👍
1
ReplyQuote



 benson
(@benson)
Reputable Member Member
Joined: 1 year ago
Posts: 122
22/06/2025 4:56 pm  

@cathoderay how did you get a script to run for that- did you integrate the midea control panel within HA?


   
ReplyQuote
Page 33 / 33
Forum Jump:
  Previous Topic
Next Topic  

Currently viewing this topic 1 guest.

Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online

 No online members at the moment