Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Cosy Octopus and heat pump settings
Posted by: @toodles600 litres! Ouch!!!
Usually closer to 300 at present, but we are gradually moving from the childhood to the shower-hogging teenager phase of life, so only anticipate it getting worse over the next few years! Part of the motivation for all our upgrades 🙂
@derek-m Information for this at: https://www.gov.uk/tax-on-shopping/energy-saving-products
It does require an installer to carry out the workas in my own circumstances. Regards, Toodles.
Toodles, heats his home with cold draughts and cooks food with magnets.
@josephiah Roll-on the days of ‘Fledging’ eh?! Though as I understand it they may grow their wings but still stay ‘at home;! Regards, Toodles.
Toodles, heats his home with cold draughts and cooks food with magnets.
Posted by: @toodles@josephiah Roll-on the days of ‘Fledging’ eh?! Though as I understand it they may grow their wings but still stay ‘at home;! Regards, Toodles.
That is easily remedied, you just change all the locks whilst they are out. 😋
Because I have battery capacity for the day, (so far at least) I have only needed to use the lowest rate 6 hours each day to keep the Powerwalls topped up to cover the other 75% of the day. (Capacity that is also useful when we have saving sessions!) Whilst we have 10 degrees C. plus temperatures, the Daikin 8 kW heat pump is ticking over at 0.5 kW/h or less. 🙂 I still receive the daily summaries for Agile and although the lowest rates have dipped to negative here and there, I’ll be sticking with Cosy for simplicity and to save my better half having to worry should I be unable to pick out the cheapest half-hours with Agile. Regards, Toodles.
Toodles, heats his home with cold draughts and cooks food with magnets.
- 27 Forums
- 2,769 Topics
- 65.3 K Posts
- 1,133 Online
- 7,173 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
@majordennisbloodnok Yes, that ‘Early days of a busines...
By Toodles , 4 minutes ago
-
RE: Heat Pump deployment statistics: June 2026
To my eyes, sat behind all of this is a basic policy ma...
By Temperature_Gradient , 20 hours ago
-
Thank you @majordennisbloodnok – that means a lot, part...
By Mars , 1 day ago
-
We’ve just passed 20 million forum views! 🎉
It's official. The Renewable Heating Hub forums have of...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
That calculation is reasonable, output is proportional ...
By JamesPa , 1 day ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
Have you looked at the Nibe website? They list their ap...
By Lizzie , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 3 days ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 3 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 3 days ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 3 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 4 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 4 days ago
-






