Recent Posts

| Forums | Topics

Page 60 / 165 Prev Next

Posts with their shortened content
	RE: Are We Sleepwalking Into Another Race to the Bottom? By JamesPa, 2 weeks ago Forum Government Schemes, Regulations, Planning & Organisations
	I could definitely go with that. Two distinct options with two distinct marketing terms.
	RE: Grant 13kW Aerona3 - issues getting zones to temp By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thats simply a lie! MCS guarantee very little and certainly do not guarantee radiators or specific models of radiators. If you wish ask for the written evidence of this statement. There is a questio...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@pash44pump - AI may have its uses (and I sort of allowed for that possibility by saying if you can verify the sources) but I always start from a point of scepticism. I have always been like that. Med...
	RE: Help me keep the faith with my air source heat pump installation By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	If you have HA up and running watching the flow temp or the power tells you its cycling. Here is my FT Attachment : image.png and power Attachment : image.png showing cycl...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Treble post apologies. To be clear - myself and specialist have said why not just remove the LLH and the house side pump, keep zones open etc and have a volumiser. Seeing as the LLH has been a ...
	RE: Mitsubishi Ecodan R290 10kW performance By Sheriff Fatman, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Totally agree that any system is reliant on the ability it provides a user, either directly or via a 3rd party, to interact with it. A significant factor in choosing the Ecodan system was its compati...
	Mediation with RECC, what's your experience? By TreeWizard, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	After a particularly bad install I finally seem to have a working system (fingers crossed for this winter). I'm now chasing the installer for compensation, I've had to take weeks off work dealing wi...
	RE: Help me keep the faith with my air source heat pump installation By AdamK, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa is there a way to show how it’s cycling etc. trying to figure what’s wrong as I’m getting 3.2 cop. Looking at my powerwall 3 it shows a cycle about once per hour so can’t figure why such low ...
	RE: Mitsubishi Ecodan R290 10kW performance By F1p, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@sheriff-fatman Yes, i understand from the user perspective you no longer need to interact with the front-end interface of MELCloud But for Havenwise to operate, it depends entirely on the MELCloud "s...
	RE: Mitsubishi Ecodan R290 10kW performance By Sheriff Fatman, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Using Havenwise replaces the need to do anything directly with MELCloud, in terms of operating the system. If you opt for Havenwise control, the MELCloud heating settings are switched to a 29C room t...
	RE: Are We Sleepwalking Into Another Race to the Bottom? By Majordennisbloodnok, 2 weeks ago Forum Government Schemes, Regulations, Planning & Organisations
	I think we all have a healthy skepticism when it comes to marketing; that’s true. Perhaps I’d be more comfortable if Heatgeek rebadged their two streams so as to work together. Black Label means nothi...